- Mailman-users - lists.mailman3.org

Delete archive of mailing list
by Torge Riedel March 28, 2019

March 28, 2019

Hi list, I've successfully set up mailman3 in a test environment and deleted a test list which I only used for some basic tests. Looking at the archiver, the archive is still there and I haven't found a way to delete it. Although I am logged in as admin. Is there a (non-) official way to delete the archive? I want a clean environment for the later user to test mailman3. Thanks and regards Torge

2 2

Introducing Mailman Web project
by Abhilash Raj March 26, 2019

March 26, 2019

I have been working on a new sub-project Mailman Web[1][2]. This project basically combines Postorius and Hyperkitty together in a single package which you can easily use to serve Mailman's web interface. The basic motivation behind this was to make it simpler for people to install the web interface *and* make it easier for people to configure Mailman's web ui. Both Postorius and Hyperkitty are based on Django Web Framework, which uses settings.py as its default configuration language. While it is quite convenient for Python developers to be able to put Python statements in configuration to join/edit/configure settings. However, I think a traditional INI, or TOML style configuration is easier for non-developers without having to worry about PYTHONPATH, valid Python sytax etc, etc. For this reason, I decided to combine all the projects together into a Django project which can be easily installed and run: $ pip install mailman-web # Export Settings for commands to just work. $ export DJANGO_SETTINGS=mailman_web.settings $ django-admin migrate $ django-admin runserver This should get you default settings for running. If you want to customize your installation, which you almost always would need to in a prod environment, you can create a config file at one of these locations (which are searched in following order): - /etc/mailman-web.toml - /etc/mailman3/mailman-web.toml - ./mailman-web.toml Note that we support only TOML as the configuration language[3][4] because of its simplicity. I would have loved to use INI, like Mailman Core, but it turns out to be way too simple to represent more complex data structures like maps and tables, that is commonly used in Django's Settings. This project is currently in alpha stage (I created it today!), but can be installed with pip[5] and in my basic tests works. There isn't much in the project itself beyond some configurations. I also took this opportunity to document all the settings that are used in Mailman Web (both Postorius and Hyperkitty) together[6]. This is documented in code and so I really hope that it won't go out of date like many other places ;-) Improvements to docs is very welcome, just a modification of a comment and is quite easy to propose right in your web browser using Gitlab! Any questions, comments or suggestions are welcome. You can open issues for feature requests on gitlab[1] too. [1]: https://gitlab.com/mailman/mailman-web [2]: https://mailman-web.readthedocs.io/en/latest/ [3]: https://github.com/maxking/django-settings-toml [4]: https://github.com/toml-lang/toml [5]: https://pypi.org/project/mailman-web/ [6]: https://mailman-web.readthedocs.io/en/latest/settings.html -- thanks, Abhilash Raj (maxking)

2 6

Configuring the List-Archive and Archived-At headers
by Ralph Seichter March 25, 2019

March 25, 2019

With archiving enabled, mail is sent with headers like the following: Archived-At: <https://example.com/hyperkitty/list/foo-users@lists.example.com/message/ABC/> List-Archive: <https://example.com/hyperkitty/list/foo-users@lists.example.com/> List-Post: <mailto:foo-users@lists.example.com> List-Subscribe: <mailto:foo-users-join@lists.example.com> The 'mailto:' entries are fine, but I need all 'https:' links to be prefixed with https://lists.example.com instead of https://example.com . Does Mailman extract CN parts from the SSL certificate to populate the header values (that would explain 'example.com' in my tests), or is this something I can influence using configuration parameters? I searched the docs for Mailman Suite and HyperKitty, but did not find an answer. -Ralph

5 9

Non resolved placeholders in action message
by Torge Riedel March 23, 2019

March 23, 2019

Hi, after adding a new moderator to a list I get the following message in a green box: %(email)s has been added with the role %(role)s Looks like the placeholders are not resolved (correctly). Should I report this somewhere as a bug? Mailman Core Version GNU Mailman 3.2.0 (La Villa Strangiato) Mailman Core API Version 3.0 Mailman Core Python Version 3.6.7 (default, Oct 22 2018, 11:32:17) [GCC 8.2.0] Best regards Torge

2 1

State of STARTTLS/SMTPS support?
by Ralph Seichter March 21, 2019

March 21, 2019

Hello list. I just found https://gitlab.com/mailman/mailman/issues/252 and was surprised to see that a) the issue is two years old and b) a related merge request has been submitted a year ago and is also still open. The possibility to send mail unencrypted via localhost is something I have in a test environment, but not in production. I need to be able to specify settings that look like these: [mta] smtp_host: outbound-mta.mydomain.tld smtp_port: 587 smtp_security: STARTTLS When is STARTTLS/SMTPS likely to become available in Mailman? -Ralph

2 2

How to best disable message decoration for all lists defined for a domain
by Ralph Seichter March 19, 2019

March 19, 2019

Hello list. I have read [1] and [2], but I am not quite sure what the recommended method is to completely disable message headers/footers and subject modifications for *all* lists tied to a specific domain. Being new to Mailman 3, I was actually surprised that there are no configuration switches in the Web UI's settings for mailing lists that allow me to get rid of unwanted message decorations. [1] https://mailman.readthedocs.io/en/latest/src/mailman/handlers/docs/decorate… [2] https://mailman.readthedocs.io/en/latest/build/lib/mailman/rest/docs/templa… Thanks for your input. -Ralph

3 4

REST Runner (and other runners) taking long time to boot up
by Dmitry Makovey March 18, 2019

March 18, 2019

splitting this discussion into it's own thread from "MM3 occasionally chokes (?)". Re-iterating background info for posterity: we have been experiencing increasingly long boot ups from mailman-core over the past year to the point where it's at about 45min for the sequence to complete. We run couple of mailing lists (20+) that are anywhere between 100 and 10K+ members and most of them are low traffic. From what I can tell all that time is spent doing some sort of indexing operations, I'm writing from memory since I can't restart the system to confirm that. sizes of directories that containers use: 3.6G core 352M database 285M web state of my queues (as far as I understand how to evaluate them: $ for q in core/var/queue/*; do echo ${q}; ls ${q}/ | wc -l ; done core/var/queue/archive 1 core/var/queue/bad 3845 core/var/queue/bounces 0 core/var/queue/command 0 core/var/queue/digest 0 core/var/queue/in 0 core/var/queue/nntp 0 core/var/queue/out 7 core/var/queue/pipeline 0 core/var/queue/retry 1 core/var/queue/shunt 958 core/var/queue/virgin 0 what kind of tuning should we be looking into to speed up our boot-ups? -- Sr System and DevOps Engineer SoM IRT

2 1

Maximum number of recipients error
by brian＠emwd.com March 18, 2019

March 18, 2019

I am unable to modify the "Maximum number of recipients" setting. It generates the following error when I click the "save changes" button: "An error occured: Unknown attribute: max_num_recipients" I am using the docker version of MM3 and its happening on "Postorius Version 1.2.3". Is this a known bug? Brian

3 2

MM3 occasionally chokes (?)
by Dmitry Makovey March 18, 2019

March 18, 2019

In the last couple of month we've observed some odd behavior from MM3 (namely the core) where it seems like email that is about to be sent to a large-ish mailing list (10K users) has been processed yet never gets sent out until we restart the core. I would appreciate any pointers on where to look for the source of the problem. At the moment, since I can't reliably reproduce it I can't really test it nor do I know where to look next time things get stuck. Mailing list in question is high profile thus when event like this happens I have only limited time amount to spend on troubleshooting/digging before I just restart the core (which by the way takes about 45min to fully start... which is another puzzle to solve at later time) -- Sr System and DevOps Engineer SoM IRT

2 5

REST API Question: possible to change user preferred email?
by Nathan Dixon March 18, 2019

March 18, 2019

Hi, We are in need of being able to change a user's email address via the REST API. After looking through the documentation and code, I can't see a way to do this in a simple way. Although the documentation seems to show that if a user changes their preferred address, it will track throughout all their subscriptions. See: https://gitlab.com/mailman/mailman/blob/master/src/mailman/rest/docs/member… "When Gwen changes her preferred address, her subscription automatically tracks the new address." The only way I can see to do this via the REST API would be to do the following long winded way: *1. Create a new address:* POST to http://<api_url>/3.1/users/<$OldEmail>/addresses $postData: {email = "$NewEmail"} *2. Verify the new address:* POST to http://<api_url>/3.1/addresses/<$NewEmail>/verify $postData: { } *3. Get all the memberships for the old email address* $memberships = GET to http://<api_url>/3.1/addresses/<$OldEmail>/memberships *4. Change users email for each membership individually* foreach ($membership in $memberships) { PATCH to http://<api_url>/3.1/members/<$membership.member_id> $pathData: { address = $NewEmail } } *5. Delete Old Address* DELETE to http://<api_url>/3.1/addresses/<$OldEmail> Am I missing something (as in there is a way to do a single PATCH request somewhere)? Or is this the only way to update someone's email address with these 5 steps? Thanks, Nathan Dixon

2 1

[Mailman-Users] mailman 3 and freeipa
by Stephen J. Turnbull March 18, 2019

March 18, 2019

Crossposting and redirecting replies to mailman-users(a)mailman3.org. Steven Jones writes: > I cant find anything on this so far but can Mailman3's webui use > freeipa as the authentication mechanism? Hi Steve, I don't have a complete answer offhand (and right now I'm just reducing my inbox so a single google search is as much as I can do), but searching for "freeipa django" indicates that there are "connectors" for Django and FreeIPA. The nicest option would be a plugin for Django's socialauth application. If that doesn't seem to exist, perhaps you can just add a FreeIPA application to the Django configuration. You would need to add it to both Postorius and HyperKitty configurations. Steve -- Associate Professor Division of Policy and Planning Science http://turnbull.sk.tsukuba.ac.jp/ Faculty of Systems and Information Email: turnbull(a)sk.tsukuba.ac.jp University of Tsukuba Tel: 029-853-5175 Tennodai 1-1-1, Tsukuba 305-8573 JAPAN

2 1

How to count the number of members in a list using Mailman client?
by Alan So March 18, 2019

March 18, 2019

I tried to do so using Mailman client but it is really slow for lists with size > 1000. I use the following code snippet: my_list = client.get_list(listname) print ("number of members =", len(my_list.members)) Are there any other ways to do so in a much faster speed? Thanks.

2 1

Assistance with mailman3
by ayen＠afilias.info March 15, 2019

March 15, 2019

Hi all I'm pretty new to mailman but been trying to install mailman 3 and been running into issues, following the documentation at http://docs.mailman3.org/en/latest/prodsetup.html installed Python 3.6, nginx, ruby-sass then with pip installed whoosh mailman-hyperkitty postorius hyperkitty mailman tried to start mailman core, symlinked master and runner -> /usr/bin/ (otherwise it wouldn't run) mailman core starts but when I hit the api url I get this in the logs File "/usr/local/lib/python3.6/dist-packages/mailman-3.2.2-py3.6.egg/mailman/database/transaction.py", line 50, in wrapper rtn = function(*args, **kws) File "/usr/local/lib/python3.6/dist-packages/mailman-3.2.2-py3.6.egg/mailman/rest/wsgiapp.py", line 218, in __call__ return super().__call__(environ, start_response) File "/usr/local/lib/python3.6/dist-packages/falcon/api.py", line 248, in __call__ responder, params, resource, req.uri_template = self._get_responder(req) File "/usr/local/lib/python3.6/dist-packages/falcon/api.py", line 664, in _get_responder route = self._router_search(path, req=req) TypeError: find() got an unexpected keyword argument 'req' Mar 13 10:54:44 2019 (17273) 127.0.0.1 - - "GET /3.1/ HTTP/1.1" 500 59 and on frontend "A server error occurred. Please contact the administrator." that leads to my gnu not working and throwing keyerrors for postorius. I'm using a clean install of ubuntu 18.04 but have also tried to install on centos 7 with no success. Are there any missing dependencies or steps that I've missed any assistance would be appreciated. Andy

3 2

Import Mailman 2.1.15 => Mailman 3 fails
by Jens Bretschneider March 15, 2019

March 15, 2019

Hi, we want to replace our Mailman 2.1.15 installation and have installed Mailman 3 with Docker (maxking/docker-mailman). Everything seems to be fine so far, but the import of the old mailing lists fails. There are two different exceptions: MySQLdb._exceptions.OperationalError: (1366, "Incorrect string value: '\\xE2\\\x80\x8D0\xE2\\x80...' for column `mailmandb`.`hyperkitty_email`.`content` at row 1") as well as MySQLdb._exceptions.OperationalError: (1048, "Column 'description' cannot be null") The complete log can be found here: https://www.dropbox.com/s/htd4eia1cg1kyi7/mailman3_import_log.txt?dl=0 Any idea what's going wrong here? Kind regards, Jens

3 3

Unable to configure mailman . Please give any information
by pradeep Kumar xplorer March 14, 2019

March 14, 2019

Subject: [Fwd: Please list the variables i need to modify in the configure.in] From: "Pradeep Kumar Xplorer" pradeepkumarxplorer(a)pradeepkumarxplorer.com Date: Mon, March 11, 2019 4:04 am To: mailman-users(a)mailman3.org Priority: High Read Receipt: Requested [ Send Read Receipt Now ] Options: View Full Header | Print | Download this as a file ---------------------------- Original Message ---------------------------- Subject: Please list the variables i need to modify in the configure.in From: "Pradeep Kumar Xplorer" pradeepkumarxplorer(a)pradeepkumarxplorer.com Date: Thu, March 7, 2019 6:36 am To: mailman-users(a)python.org before running the configure script I changed AC_PREFIX_DEFAULT(/home1/explodi4/public_html/MAILMAN) and it still says /home/mailman does not exist. Pradeep Kumar Xplorer http://www.dhyanayoga.info http://www.pradeepkumarxplorer.com/2016/CyberCrime/index.php

2 1

hyperkitty error importing (from mm2 mbox) HTML emails / binary attachments
by M4tze March 13, 2019

March 13, 2019

Dear list, I am importing emails from mm2 mbox archives into hyperkitty. This generally works but for HTML mails or mails having binary attachments, I get some errors: + ProgrammingError: (1064, u'You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near \'_binary\'<html>\\n<head>\\n<meta http-equiv=\\"Content-Type\\" content=\\"text/html; c\' at line 1') + I am using the following debian/ubuntu packages: * mailman3 3.1.1-9 * mailman3-full 3.1.1-9 * mailman3-web 0+20170523-14 * python-django-mailman3 1.1.0-4 * python-mailmanclient 3.1.1-5 * python3-mailman-hyperkitty 1.1.0-4 * mysql-server 5.7.25-0ubuntu0.18.04.2 * mysql-server-5.7 5.7.25-0ubuntu0.18.04.2 * mysql-server-core-5.7 5.7.25-0ubuntu0.18.04.2 I changed the charset & collation of the mailman-web (incl. hyperkitty's) tables from latin1 to UTF8_mb4, which was neccessary to fix errors importing UTF8 mail. Does anyone has an idea of how to fix that? Kind regards - m4tze

1 0

mailman admin (django) interface does not work anymore after deleting website example.com
by Torge Riedel March 10, 2019

March 10, 2019

Hi, I've just installed successfully mailman3 and started with basic configuration. When adding a new domain it gives me a link to a django admin page where I have to configure the available websites. I deleted the existing "example.com" and added a new one "lists.mydomain.de". Now the admin (django) interface always gives "An error occurred while processing your request". After one of the first navigation clicks I saw a message that "site with id 1 is missing". Can you point me to where the problem is and how to solve it? Maybe it was not a good idea to delete the existing one, but I would have expected that django will prevent this, if it will fail afterwards. Thanks and regards Torge The logs: Traceback (most recent call last): File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/core/handlers/exception.py", line 34, in inner response = get_response(request) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/core/handlers/base.py", line 156, in _get_response response = self.process_exception_by_middleware(e, request) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/core/handlers/base.py", line 154, in _get_response response = response.render() File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/template/response.py", line 106, in render self.content = self.rendered_content File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/template/response.py", line 83, in rendered_content content = template.render(context, self._request) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/template/backends/django.py", line 61, in render return self.template.render(context) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/template/base.py", line 169, in render with context.bind_template(self): File "/usr/lib/python3.6/contextlib.py", line 81, in __enter__ return next(self.gen) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/template/context.py", line 246, in bind_template updates.update(processor(self.request)) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django_mailman3/context_processors.py", line 32, in common context["site_name"] = get_current_site(request).name File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/contrib/sites/shortcuts.py", line 13, in get_current_site return Site.objects.get_current(request) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/contrib/sites/models.py", line 60, in get_current return self._get_site_by_id(site_id) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/contrib/sites/models.py", line 32, in _get_site_by_id site = self.get(pk=site_id) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/db/models/manager.py", line 82, in manager_method return getattr(self.get_queryset(), name)(*args, **kwargs) File "/opt/mailman/web/venv/lib/python3.6/site-packages/django/db/models/query.py", line 399, in get self.model._meta.object_name django.contrib.sites.models.Site.DoesNotExist: Site matching query does not exist.

3 3

Automatic response to non-members
by daniel.eckhoff＠gmail.com March 8, 2019

March 8, 2019

Hi! I have a mailing list, where I accept every incoming message without subscription. I set this up for a recruitment website (jobs(a)xyz.org) It works nice. All mails are sent to archive where me and other admins can go through all applications. Now we want to set up an automatic response to incoming messages. I tried to set "Autorespond postings" but since the applicants are not subscribers, this won't work. I aso set the template for "Notice sent to a poster when their message has been received by the mailing list". Both approaches don't seem to work. Any ideas to get this working without relying on additional software?

2 1

Domain Resolving Issue
by brian＠emwd.com March 7, 2019

March 7, 2019

I am running a Mailman 3 server with about 5 list domains configured on it. Most of them resolve quickly both to Postorius and HyperKitty. However there is one domain that resolves very slowly. Once it does, access to other pages/tasks go quickly. If you don't do anything with that domain in the browser after about 5 minutes, it takes its time again to resolve. What could be causing this? The webserver is Nginx. Not sure if this is a Mailman 3 issue or not. Brian

2 1

Change settings via mailman shell
by kk＠eco.cept.org March 6, 2019

March 6, 2019

I am trying to find a way to set some parameters on the lists from a shell script. One specific parameter - max_message_size is not presented through the REST interface apparantly, and i found a way to set this with mailman shell command. Continuing this path i seem not to be able to set any other parameters like this: m.archive_policy = 'never' m.subject_prefix = '' m.dmarc_mitigate_action = 'munge_from' m.dmarc_mitigate_unconditionally = True commit() However i end up with this error: sqlalchemy.exc.StatementError: (builtins.AttributeError) 'str' object has no attribute 'value' [SQL: 'UPDATE mailinglist SET archive_policy=?, dmarc_mitigate_action=?, dmarc_mitigate_unconditionally=?, subject_prefix=? WHERE mailinglist.id = ?'] [parameters: [{'dmarc_mitigate_unconditionally': 'True', 'dmarc_mitigate_action': 'munge_from', 'subject_prefix': '', 'archive_policy': 'never', 'mailinglist_id': 65}]] Not sure what to make of it, but it seems like the fields are not there. I then proceed to get a list of all parameters with information found here: http://docs.mailman3.org/projects/mailmanclient/en/latest/src/mailmanclient… and the parameters seems to exist - however this list is made with the REST interface - so my question are - are there a difference in parameters in "mailman shell" command and REST interface - and how do i then get a list of parameter and possible settings in the "mailman shell" command ? Thanks in advance Kenneth Denmark

2 1

Mailman3 without Hyperkitty in docker
by Danil Smirnov March 4, 2019

March 4, 2019

Hi, I'm interesting in Mailman3 deployment with archiving feature completely disabled. I've tried to deploy Core + Postorius using this docker-compose template: https://github.com/maxking/docker-mailman/blob/master/docker-compose-postor… Unfortunately Postorius version came with this template is quite outdated: 1.2.0a1 (as reported in page footer). In Hyperkitty-enabled docker image I see version 1.2.3. I've also checked image maxking/postorius:rolling but it seems irrelevant/broken (container exits with error). Are there newer Postorius docker image I can use? Thanks, Danil Smirnov

3 18

Re: postorius only show 50 owner lists
by Alejandro Lopez March 3, 2019

March 3, 2019

Ok, thanks!

1 0

postorius only show 50 owner lists
by elalelopez＠gmail.com March 2, 2019

March 2, 2019

Hi, I have installed mailman3 suite on Debian 9. And postorius only lists up to 50 addresses when filter by owner: https: //lists.domain/mailman3/postorius/lists/? role = owner A first query in the database returns all the lists, but then, when it makes the subsequent queries for each list, it ends when it reaches 50. Any ideas? regards

2 3

Selective mailing
by chucka＠blackforest-co.com March 2, 2019

March 2, 2019

I'm trying to find out if I move my web site to a hosting company using MM Ver 3 - with SQL. If I have a membership list in MySql used by MM - can I send an email to a select group? ["Your dues are due"]. Assumes the MM tables can be accessed? Anyhow what I want to do is: send message96 where expire > next month else send message95 Thanks

4 7

From address of subscription notifications
by worik March 2, 2019

March 2, 2019

Friends When I subscribe some body to to a list I on I get a notification that says it comes from changeme(a)example.com As far as I can tell no subscribers are getting mail with that, so this is not a crises. But it is untidy and I cannot find where to change it. SERVE_FROM_DOMAIN is set in the mailman-web/environment section of docker-compose.yaml (I am using the docker distribution...) cheers Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

4 4

Managing users
by worik March 1, 2019

March 1, 2019

Is there a interface for managing users? I can use the data base directly to query `auth_user` etcetera, but Postorious? Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

2 1

Bounces address spammed
by Enrique Terrazas Feb. 28, 2019

Feb. 28, 2019

Greetings, I hope everyone is having a good day. We have a highly visible list that is being spammed with join requests from spoofed addresses. When the confirmation email is sent a bounce is received by the list owner. The count is in the 100’s of bounced emails/hour. We noticed they are all coming from one particular domain, this may help if we are able to filter/block the domain. What would be the best way to handle this? Is there a way to handle this granularly at the list level? Thank you as always for your assistance. Enrique

2 2

Member occur in Subscription Requests when Subscription Policy = Confirm
by Henrik Rasmussen Feb. 27, 2019

Feb. 27, 2019

When Subscription Policy is set to Confirm (only), new potential subscriber appears in Subscription Requests until they have confirmed that they actually want to subscribe. As expected, the new potential subscriber receives a mail with a link to confirm. And also as expected, since moderation is NOT needed, the admin does not receive a mail about authorisation. Why does the new potential subscriber appear in Subscription Requests until confirmed by the subscriber, when the admin doesn't have to appove anyway? Is that by design? /Henrik Rasmussen

2 1

Archives visible to all
by worik Feb. 25, 2019

Feb. 25, 2019

When I load my new mailing list system, before I log in, I can see the archives of all the lists. Without logging in. Even lists with archives set to private archives. What can I do about that? Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

2 3

Is logging.subscribe working in /etc/mailman.cfg?
by ktso＠cuhk.edu.hk Feb. 25, 2019

Feb. 25, 2019

I have put the following in /etc/mailman.cfg and restart mailman. An empty file can be created but nothing can be logged when admin or non-member subscribe/unsubscribe. Anything I have missed? So far I can only see log appear in mailman.log and smtp.log. Thanks. [logging.subscribe] path: subscribe.log level: debug

3 5

Changing delivery mode for ALL subscribers on a SINGLE list using REST
by Henrik Rasmussen Feb. 25, 2019

Feb. 25, 2019

While in Mailman Settings a user can change delivery mode for either Global (all subscriptions regardless of address or list), Address based (regardless of list name) or List Based (regardless of address). The list admin can change a user's delivery mode setting on a single list (affecting only that address and only that list), but only one subscriber at the time on the list. Changing a user's delivery mode can also be done using REST[1], but I asume this will affect the user's subscription on all the lists where she subscribed using the same address. How do I change ALL the subscribers[2] on a _single list_ to a certain delivery mode, using REST? [1] https://mailman.readthedocs.io/en/latest/src/mailman/rest/docs/preferences.… [2] Most likely by iterating through all subscribers, one at the time, on the list in question.

2 4

Tracking from gravatar
by worik Feb. 19, 2019

Feb. 19, 2019

Privacy badger reports one tracker (for which it disables cookies) on my Mailman installation. It is: secure.gravatar.com What is this for and how do I get rid of it? I looked at the site and it seems like some sort of take a avatar any where. I do not want that on the lists I am managing for this group of users. cheers Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

3 3

Turn off social logins?
by worik Feb. 18, 2019

Feb. 18, 2019

How do I turn off the social logins? I looked in the admin manual but They are not working, but I absolutely do not want them for now. Maybe one day, but my users will be allergic to even the hint.... Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

12 27

hyperkitty failed to create a thread
by Danil Smirnov Feb. 17, 2019

Feb. 17, 2019

Hi all, What could be a reason of HyperKitty failing to create a thread from chained emails? For example, see "RECENTLY ACTIVE DISCUSSIONS" on page https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/ "Openvpn and Network mapping" discussion displayed as five threads instead of only one... Any ideas how to improve HyperKitty ability to detect threaded messages? With my best regards, Danil Smirnov

6 19

Logging of unsubscribe process
by Johannes Winter Feb. 16, 2019

Feb. 16, 2019

Dear MM3 list, I was wondering whether the unsubscribe process is logged. One user accidentally hit "unsubscribe all" aborted the process but is now unsure whether he accidentally deleted users. Is there a easy way to check? Best regards, Johannes Winter

2 1

Remove message from send queue
by Johannes Winter Feb. 15, 2019

Feb. 15, 2019

Dear MM3 list, A address with false syntax got added accidentally to one of our lists. The smtp server now rejects the mail with the following error codes found in mailman.log: Feb 15 11:36:55 2019 (34) <bbd7a3da-32e7-ad12-4b5b-e250b3447639(a)domain.tld> recipients refused: {'l3s3105p7(a)91.55.218.102': (401, b'4.1.3 Bad recipient address syntax')} Feb 15 11:36:55 2019 (34) <bbd7a3da-32e7-ad12-4b5b-e250b3447639(a)domain.tld> smtp to xxx(a)yyy.com for 1 recips, completed in 0.031468868255615234 seconds Feb 15 11:36:55 2019 (34) <bbd7a3da-32e7-ad12-4b5b-e250b3447639(a)domain.tld> post to list from address(a)domain.tld, 767768 bytes, 1 failures Feb 15 11:36:55 2019 (34) <bbd7a3da-32e7-ad12-4b5b-e250b3447639(a)domain.tld> delivery to l3s3105p7(a)91.55.218.102 failed with code 401, b'4.1.3 Bad recipient address syntax' How to remove this mails from the queue? Removing the address from the list doesn't help. Best regards, Johannes Winter

2 1

Mass subscription maximum addresses
by Enrique Terrazas Feb. 14, 2019

Feb. 14, 2019

Greetings, Is there a maximum amount of accounts that can be imported using the postorius mass subscription application? I know we can import using the command line; some of our customers have very large mailing lists that change by semester. Trying to see how much of that work could be handled by the list owner rather than by the mailman admins. As always thank you for your time and assistance. Best regards, Enrique

2 1

Feature list / compare mailman3 <-> mailman3
by Torge Riedel Feb. 14, 2019

Feb. 14, 2019

Hi, here I have found an interesting sentence: https://mailman.readthedocs.io/en/latest/src/mailman/docs/release-notes.html "Mailman 3 is not yet feature complete with Mailman 2.1" Is there somewhere an overview of what is missing / different? Since I'm faced with changing the server where mailman is running on, I came up to install mailman3 instead of mailman2. Best regards Torge

2 1

Different (official?) documentations available - what is the correct one?
by Torge Riedel Feb. 14, 2019

Feb. 14, 2019

Hi, I've found two different documentations: http://docs.mailman3.org/en/latest/index.html https://mailman.readthedocs.io/en/latest/README.html Where the first one looks to me like the official documentation (when looking at the URL), the second one looks more up-to-date. Is there a reason behind it? Best regards Torge

2 1

Gmail emails bouncing - anybody seen this problem?
by worik Feb. 14, 2019

Feb. 14, 2019

Friends On a fresh install (docker) on a fresh VPS I am getting all Mailman messages to Gmail addresses bouncing telling me I am sending too many messages. Has anybody else have this problem? I am getting the following error in mail.log: "Our system has detected an unusual rate of 550-5.7.1 unsolicited mail originating from your IP address. To protect our 550-5.7.1 users from spam, mail sent from your IP address has been blocked. 550-5.7.1 Please visit 550-5.7.1 https://support.google.com/mail/?p=UnsolicitedIPError to review our 550 5.7.1 Bulk Email Senders Guidelines. l26si395949wme.8 - gsmtp" I have been to the URL mentioned and exhausted my options there. Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

3 6

Postorius 1.2.3 and MailmanClient 3.2.1 is now out
by Abhilash Raj Feb. 11, 2019

Feb. 11, 2019

Hi All, I am very pleased to announce (a bit late) that Postorius 1.2.3 and MailmanClient 3.2.1 is now out. The full set of changelog can be found in the documentation[1][2]. The most notable feature that I can think of is non-member management in Postorius. New releases are available on PyPI[3][4]. Thanks to all the contributors who made this release possible! :) [1]: https://postorius.readthedocs.io/en/latest/news.html#id2 [2]: https://mailmanclient.readthedocs.io/en/latest/src/mailmanclient/docs/NEWS.… [3]: https://pypi.org/project/mailmanclient/ [4]: https://pypi.org/project/postorius/ -- thanks, Abhilash Raj (maxking)

2 6

How can administrator sign people up to a list?
by worik Feb. 11, 2019

Feb. 11, 2019

As a list administrator, how do I add a group of email addresses to a list? Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

2 3

Recommendation - Developer
by jk＠ascii.com Feb. 8, 2019

Feb. 8, 2019

Hi - we are currently seeking a developer to work with us on leveraging HyperKitty and our current use of mailman. Any suggestions is appreciated, please DM me at jk(a)ascii.com. Thank you in advance.

1 0

mailman start - can't open file
by Mark Dale Feb. 7, 2019

Feb. 7, 2019

Hi All, On a new installation (pip), when starting Mailman it seems it cannot find the "master" file. Have I missed a configuration somewhere that tells it to look in "/usr/local/bin" rather than "/usr/bin"? TIA, Mark root@sfo:/etc# mailman start Starting Mailman's master runner /usr/bin/python3: can't open file '/usr/bin/master': [Errno 2] No such file or directory root@sfo:/etc# ls -la /usr/local/bin total 1528 drwxrwsr-x 4 root staff 4096 Feb 7 05:22 . drwxrwsr-x 10 root staff 4096 Jan 23 23:12 .. -rwxr-xr-x 1 root staff 215 Feb 7 04:03 aiosmtpd -rwxr-xr-x 1 root staff 216 Feb 7 04:03 alembic -rwxr-xr-x 1 root staff 266 Feb 7 04:24 django-admin -rwxr-xr-x 1 root staff 125 Feb 7 04:24 django-admin.py -rwxr-xr-x 1 root staff 218 Feb 7 04:03 falcon-bench -rwxr-xr-x 1 root staff 225 Feb 7 04:03 falcon-print-routes -rwxr-xr-x 1 root staff 221 Feb 7 04:03 mailman -rwxr-xr-x 1 root staff 216 Feb 7 04:03 mako-render -rwxr-xr-x 1 root staff 220 Feb 7 04:03 master -rwxr-xr-x 1 root staff 214 Feb 7 04:03 nosetests -rwxr-xr-x 1 root staff 214 Feb 7 04:03 nosetests-3.4 drwxr-sr-x 2 root staff 4096 Feb 7 04:24 __pycache__ -rwxr-xr-x 1 root staff 220 Feb 7 04:03 runner -rwxr-xr-x 1 root staff 1496712 Feb 7 04:52 uwsgi drwxr-xr-x 12 root staff 4096 Feb 7 05:22 var root@sfo:/etc# mailman info GNU Mailman 3.2.0 (La Villa Strangiato) Python 3.7.2+ (default, Feb 2 2019, 14:31:48) [GCC 8.2.0] config file: /etc/mailman.cfg db url: sqlite:////etc/var/data/mailman.db devmode: DISABLED REST root url: http://localhost:8001/3.1/ REST credentials: restadmin:restpass

2 2

Strange error in uwsgi-error.log
by brian＠emwd.com Feb. 7, 2019

Feb. 7, 2019

I am seeing the following error being logged every few minutes: 18:50:29 [Q] INFO Process-1:7 processing [update_from_mailman] 18:50:29 [Q] ERROR malformed return hook '<function process_task_result at 0x7f588e8c5950>' for [update_from_mailman] 18:50:29 [Q] ERROR Failed [update_from_mailman] - null value in column "description" violates not-null constraint DETAIL: Failing row contains (1, testlist@"listdomain", Testlist, null, [Testlist] , 2, 2018-12-21 22:22:08.440729+00, testlist."listdomain"). : Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/django/db/backends/utils.py", line 85, in _execute return self.cursor.execute(sql, params) psycopg2.IntegrityError: null value in column "description" violates not-null constraint DETAIL: Failing row contains (1, testlist@"listdomain", Testlist, null, [Testlist] , 2, 2018-12-21 22:22:08.440729+00, testlist."listdomain"). The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/django_q/cluster.py", line 377, in worker res = f(*task['args'], **task['kwargs']) File "/usr/lib/python3.6/site-packages/hyperkitty/tasks.py", line 66, in unlock_and_call return func(*args, **kwargs) File "/usr/lib/python3.6/site-packages/hyperkitty/tasks.py", line 293, in update_from_mailman mlist.update_from_mailman() File "/usr/lib/python3.6/site-packages/hyperkitty/models/mailinglist.py", line 192, in update_from_mailman self.save() File "/usr/lib/python3.6/site-packages/django/db/models/base.py", line 718, in save force_update=force_update, update_fields=update_fields) File "/usr/lib/python3.6/site-packages/django/db/models/base.py", line 748, in save_base updated = self._save_table(raw, cls, force_insert, force_update, using, update_fields) File "/usr/lib/python3.6/site-packages/django/db/models/base.py", line 812, in _save_table forced_update) File "/usr/lib/python3.6/site-packages/django/db/models/base.py", line 861, in _do_update return filtered._update(values) > 0 File "/usr/lib/python3.6/site-packages/django/db/models/query.py", line 712, in _update return query.get_compiler(self.db).execute_sql(CURSOR) File "/usr/lib/python3.6/site-packages/django/db/models/sql/compiler.py", line 1383, in execute_sql cursor = super().execute_sql(result_type) File "/usr/lib/python3.6/site-packages/django/db/models/sql/compiler.py", line 1065, in execute_sql cursor.execute(sql, params) File "/usr/lib/python3.6/site-packages/django/db/backends/utils.py", line 68, in execute return self._execute_with_wrappers(sql, params, many=False, executor=self._execute) File "/usr/lib/python3.6/site-packages/django/db/backends/utils.py", line 77, in _execute_with_wrappers return executor(sql, params, many, context) File "/usr/lib/python3.6/site-packages/django/db/backends/utils.py", line 85, in _execute return self.cursor.execute(sql, params) File "/usr/lib/python3.6/site-packages/django/db/utils.py", line 89, in __exit__ raise dj_exc_value.with_traceback(traceback) from exc_value File "/usr/lib/python3.6/site-packages/django/db/backends/utils.py", line 85, in _execute return self.cursor.execute(sql, params) django.db.utils.IntegrityError: null value in column "description" violates not-null constraint DETAIL: Failing row contains (1, testlist@"listdomain", Testlist, null, [Testlist] , 2, 2018-12-21 22:22:08.440729+00, testlist."listdomain"). Any ideas? Thanks, Brian

3 5

Various settings files for mailman3-web
by worik Feb. 7, 2019

Feb. 7, 2019

Friends What is the difference between the three settings*.py files in /usr/share/mailman3-web/? ~$ ls /usr/share/mailman3-web/settings* -l -rw-r--r-- 1 root root 14939 Feb 7 01:50 /usr/share/mailman3-web/settings.py lrwxrwxrwx 1 root root 28 Sep 17 11:00 /usr/share/mailman3-web/settings_local.py -> /etc/mailman3/mailman-web.py -rw-r--r-- 1 root root 6178 Sep 17 11:00 /usr/share/mailman3-web/settings_local.py.sample Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

2 1

Mass subscription in "file submit"
by erlonmz＠terra.com.br Feb. 5, 2019

Feb. 5, 2019

We would like add members using "file submit" "class ListMassSubscription(forms.Form): emails = forms.FileField( label='Select File' help_text='Select a file' ) " What is your opinion about this change?

2 1

Installation problem: Ubuntu 18.10 mailman3-full. EMAIL_HOST_USER
by worik Feb. 5, 2019

Feb. 5, 2019

Friends I am installing on a fresh ubuntu 18.10 using mailman3-full. Following http://docs.mailman3.org/en/latest/config-web.html after http://docs.mailman3.org/en/latest/config-core.html and I have got to point where I am a bit stumped. I have to set EMAIL_HOST_USER and EMAIL_HOST_PASSWORD I am unsure what I should use here. What sort of user? Worik -- If not me then who? If not now then when? If not here then where? So, here I stand, I can do no other root(a)worik.org 021-1680650, (03) 4821804 Aotearoa (New Zealand)

2 1

Using MySQL via unix socket
by Torge Riedel Feb. 2, 2019

Feb. 2, 2019

Hi, I'm trying to setup mailman3 on Linux and try to find out how the connection string must look like to let it accept unix sockets. A call to mysql -umailman -p successfully uses the socket on the machine and logs in. I tried mysql+pymysql://mailman:mailmanpass@127.0.0.1/mailman3?charset=utf8&use_unicode=1&unix_socket=/var/run/mysqld/mysqld.sock as the connection string but it says that mysql server is not available. Which is the same if remove the "unix_socket" parameter. I have found this parameter when searching the net, but I'm not sure if it is supported. Thanks in advance and best regards Torge

2 2

Audit Logs
by Enrique Terrazas Jan. 31, 2019

Jan. 31, 2019

Greetings, I’m wondering if there is an “audit log” of sorts to see who made changes to a specific list. What we’re after is a way of tracking, in case requested, who made additions or deletions of subscribers etc. I can see the DELETE commands in the ./mailman/logs/mailman.log file but it doesn’t specifically state who made the request. It can be inferred from the timestamps. I’m just wondering if there is somewhere else I should be looking for this information. Thank you, Enrique J. Terrazas

2 1