- Mailman-users - lists.mailman3.org

502 Bad Gateway??? Trying to change stuff
by am April 23, 2017

April 23, 2017

I am trying to change my email address, but forgot password. The screen for reset gets 502 Bad Gateway ------------------------------ nginx/1.4.6 (Ubuntu) any way someone can fix this????

2 2

Remove footer link
by David Terni April 23, 2017

April 23, 2017

Hi, I need to remove footer message like "to unsubscribe etc etc" from all lists. How i can do it or edit text? Thanks alot for any suggestion. David

2 1

Fwd: Incoming command emails (i.e. listname-leave) routed to list itself
by Abhilash Raj April 22, 2017

April 22, 2017

Hi Mark, Excerpts from Mark Lindsay's message of April 20, 2017 5:37 pm: <snip> Here are some baffling lines from /var/log/exim4/mainlog from the incoming > potato-leave(a)lists.mydomain.org email: > > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r DKIM: d=nervous-org.20150623. > gappssmtp.com s=20150623 c=relaxed/relaxed a=rsa-sha256 [verification > succeeded] > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r <= redacted(a)nervous.org H= > mail-qk0-f170.google.com [209.85.220.170] P=esmtp S=2466 id= > CABPy5zyQtJHXtCgrN37GHCUOjuo3J=DO_j0ZD03zm8gk+4shww(a)mail.gmail.com > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r => potato(a)lists.mydomain.org < > potato-leave(a)lists.mydomain.org> R=mailman3_router T=mailman3_transport > H=localhost [127.0.0.1] C="250 Ok" > 2017-04-21 00:25:03 1d1MNj-0007OQ-5r Completed > > Why does it say `potato(a)lists.mydomain.org <potato-leave(a)lists.mydomain.o > rg > >> `? >> > > I think this is actually an exim4 problem, so if the solution is to just > switch to postfix, then I will definitely do that. But I'm just asking in > case someone had a similar issue with exim4 and was able to work through > it. > > Yes, I had the exact same problem very recently and was able to fix it. The updated documentation[1] should fix your problem. The basic gist of the problem is that the exim configuration on the older documentation is missing a critical part. Exim4 by default strips off any prefixes/suffixes when delivering mail to the mailman, which causes mailman to post all the messages to mailing list instead of processing them as commands. `rcpt_include_affixes = true` Adding the above line to the transport fixes that problem. [1]: https://mailman.readthedocs.io/en/latest/src/mailman/docs/mt a.html#exim4-configuration thanks, Abhilash

3 2

Incoming command emails (i.e. listname-leave) routed to list itself
by Mark Lindsay April 21, 2017

April 21, 2017

Hi mailman-users, I'm new to Mailman 3 and Mailman in general, but I've got it up and running, and my external app is communicating quite well with the administrative REST API. Here's the only problem I haven't been able to figure out: Say I have a list called "potato." List members can post to the list by emailing potato(a)lists.mydomain.org. This works fine. However, incoming mail for command addresses (e.g. potato-leave(a)lists.mydomain.org) is routed to the list too. The command email gets sent out to all members, as if the user who wanted to unsubscribe had just written to potato(a)lists.mydomain.org. This is also the case with the potato-request(a)lists.mydomain.org address. I am using exim4 on Ubuntu. I followed the instructions here: http://mailman.readthedocs.io/en/release-3.0/src/mailman/docs/MTA.html. The only change I had to make to the exim4 config files in the readthedocs instructions was in this line: MM3_LISTCHK=MM3_HOME/lists/${local_part}@${domain} I had to change it to: MM3_LISTCHK=MM3_HOME/lists/${local_part}.${domain} That is how the subdirectories are named in my lists directory. e.g. potato.lists.mydomain.org. If I use the exact MM3_LISTCHK value from readthedocs, I get 550 Unrouteable bounces. Here are some baffling lines from /var/log/exim4/mainlog from the incoming potato-leave(a)lists.mydomain.org email: 2017-04-21 00:25:03 1d1MNj-0007OQ-5r DKIM: d=nervous-org.20150623. gappssmtp.com s=20150623 c=relaxed/relaxed a=rsa-sha256 [verification succeeded] 2017-04-21 00:25:03 1d1MNj-0007OQ-5r <= redacted(a)nervous.org H= mail-qk0-f170.google.com [209.85.220.170] P=esmtp S=2466 id= CABPy5zyQtJHXtCgrN37GHCUOjuo3J=DO_j0ZD03zm8gk+4shww(a)mail.gmail.com 2017-04-21 00:25:03 1d1MNj-0007OQ-5r => potato(a)lists.mydomain.org < potato-leave(a)lists.mydomain.org> R=mailman3_router T=mailman3_transport H=localhost [127.0.0.1] C="250 Ok" 2017-04-21 00:25:03 1d1MNj-0007OQ-5r Completed Why does it say `potato(a)lists.mydomain.org <potato-leave(a)lists.mydomain.org >`? I think this is actually an exim4 problem, so if the solution is to just switch to postfix, then I will definitely do that. But I'm just asking in case someone had a similar issue with exim4 and was able to work through it. Thanks a lot, Mark

2 1

Memory footprint
by David Krantz April 19, 2017

April 19, 2017

Hi. Now running mailman 3 I am a bit surprised that the memory footprint is so large. I count to 13 processes with each a virtual space of 160-250MB and a reserved space of about 50MB each. Not much, but quite much to run on smaller cloud instances which generally have limited memory. This is (a lot) more than the corresponding postgres installation uses, Is this normal? regards // David

6 6

Installing MM3 requires Django<1.11
by Henrik Rasmussen April 12, 2017

April 12, 2017

Two questions regarding Mailman 3 installation: 1) The Mail server setup at http://docs.mailman3.org/en/latest/devsetup.html#set-up-a-mail-server isn't described yet. Instead it refers to https://docs.djangoproject.com/en/1.10/topics/email/#topic-email-backends, but it doesn't say which file I have to change. According to https://www.webforefront.com/django/setupdjangoemail.html the file is called settings.py, but the only settings.py I can find at this stage is the /opt/mailman/postorius/example_project/settings.py file. According to http://docs.mailman3.org/en/latest/devsetup.html#set-up-and-run-postorius, "Postorius and HyperKitty both come with example_project directories with basic configuration so you can try them out. For this tutorial, however, we'll be using a project that combines both instead.". In what file should I change the mail settings then? 2) While installing Hyperkitty*) I got the error message "Django 1.11rc1 is installed but Django<1.11 is required by {'django-haystack'}". As I have slavishly followed the installation guide including http://docs.mailman3.org/en/latest/devsetup.html#set-up-django-mailman3, I wonder why a non-supported Django version was installed. *) http://docs.mailman3.org/en/latest/devsetup.html#set-up-and-run-hyperkitty Regards Henrik

2 1

Dockerizing Wordpress with Nginx and PHP-FPM on Ubuntu 16.04
by ddw David Wilson April 12, 2017

April 12, 2017

Barry et al; Does the link below provide a model for a complete flexible integrated Docker based install package for Mailman3? Any other progress that might suggest an easier road to enlightenment? Best regards. Dave Wilson https://www.howtoforge.com/tutorial/dockerizing-wordpress-with-nginx-and-ph…

2 1

Deploying mailman3 using containers
by Abhilash April 10, 2017

April 10, 2017

Hi All, I have been working for the past two weeks on trying to create a solution to easily deploy Mailman 3 in production. For those interested, you can find the instructions about how to use my work at http://asynchronous.in/docker-mailman/. I have tried to document the process as much as possible. This is still a work in progress, but I have a working deployment[1] using these containers. I try to keep the deployment updated with the github repo, but there is no automated deploy happening there so sometimes it gets out of sync. While this is aimed to finally become a production ready method to deploy mailman 3, it is still not there. All I can say at this point is that it works. I have tried my best to document everything and I keep updating the documentation whenever I feel anything needs more clarity. I would love some feedback to improve the process or documentation. You can open issues on the github repo[2]. Currently, container images are built from the master branch of the gitlab repos and are thus not branded as stable. I am waiting for 3.1 release to add a stable tag to the images. [1]: https://mail.araj.me/ [2]: https://github.com/maxking/mailman -- thanks, Abhilash Raj

1 0

Mailman 3 api php
by david.terni＠gmail.com March 27, 2017

March 27, 2017

Hi, I apologize if this is't the right place but I don't understand how connect mailman 3 with api and php/CURL. It's possibile to do it? I tried to use the same url used with mailman2 but doesn't work. Someone can help me? Thank's a lot

2 2

How to set up mailman 3
by David Krantz March 26, 2017

March 26, 2017

Hi. I have tried and failed to set up mailman 3 using the mailman_bundle. I get the mailman3 server running correctly, but the problem is the extremely sensitive web user interface... Now when I found this mail list I understand that mailman bundle is depricated and that I must restart from scratch. Is this true? This annoys me quite a lot, can someone responsible within the project please mark the deprecated package as such? Almost none of the documentation is completely correct. It is useful but very incomplete. The mailman_bundle generated configuration examples for e.g. apache simply is wrong or incomplete. That said I got it running using http only, but when I switched to HTTPS the login simply ceased working. I use password+username as the other solution is quite complicated to get running. I could of course switch to e.g. google login, but that would require at least some documentation on how to do that. So, is there any documentation on how to use mailman 3? The error I get now is "Please enter a correct username and password. Note that both fields may be case-sensitive." I know that I enter the correct password as it worked before I added HTTPS. Sorry for the rant, but I am very annoyed by this. I just need a mail list server that works and thought it would be very neat to run mailman3 after running a hoste mailman2 for many years. Best regards // David

4 5