- Mailman-users - lists.mailman3.org

Mailman3 not delivering list mail
by Gordon Dickens Oct. 2, 2020

Oct. 2, 2020

Hello, I have a fresh mailman3 installation that I recently upgraded from mailman2 on a debian system.Â In any event, I imported some test lists and tested my installation thoroughly and everything seemed to be working fine.Â Then, today, I imported a important live working mailing list from mailman2 and everything appeared to go well both with the import of the list addresses and the archives.Â However, when I sent out the first post on Mailman3 the post was not echoed to the list members.Â Then, I subsequently discovered that the queue had lots of mail undelivered in /var/lib/mailman3/queue/bad. It appears that my mailman3 installation has stopped delivering list mail and that all of the list mail is stuck in /var/lib/mailman3/queue/bad. How do I resolve this situation?Â Can I just remove the files with "rm *" in the /var/lib/mailman3/queue/bad directory?Â Please let me know what I should do to get things working again. Thanks, Gordon

3 7

Various patches for mm3 stable 3.3.1
by Ruth Ivimey-Cook Sept. 30, 2020

Sept. 30, 2020

Folks, For my own purposes I have created some patches which apply to the current mailman pip package. The first of them is for my purposes necessary, and has been discussed here before: being able to specify the address used to listen for tcp connections independently of the address the server considers it to be accessible at. A possible change to this patch would be to check whether this address was undefined but the old hostname was defined, and use that if so. For me this is not needed, and in any case it is a trivial change to make. The second patch adds a bunch of additional logging calls to various network-related parts of the package. I wrote these into the package because I was seeking the cause of template expansion causing messages to be silently dropped. I eventually found the cause was that I had an incorrect setting of the template root URL, but I regard the lack of anything in the logs as just as much of a bug. One important part of those changes was that I added a try/catch around two parts of the 'decorate' code, which is where the silent dropping occurred. If you only take one part of this patch, I encourage you to take this part. For the third patch, I discovered that the task runner was at one point busy-waiting to the tune of 100% cpu, and the cause was the way that the runner checked to see if there was work left in the queue. I am not quite sure what was the exact problem, but I think it was that there was something to do, but it was not achievable at that time, and the result was continual retry. The third patch changes the logic slightly so that this no longer occurs - retry will happen, but somewhat more gracefully. I hope you find some use in these three. Finally, I am currently experiencing problems with templates and would appreciate any thoughts: 1. If I do not set up 'individual' or 'full' personalisation, all is well and the default footer templates are expanded as expected. However setting up personalisation causes template expansion to fail completely, and messages get sent with a blank expansion. 2. I would find the postorius UI much easier to cope with if the default template was 'populated' into the UI wherever it was non-blank, rather than the UI starting off as if no templates were defined at all. Regards, Ruth

3 3

Unable to remove non-member
by Brian Carpenter Sept. 29, 2020

Sept. 29, 2020

Hi Everyone, I ran across a strange issue today. A client reported the inability to remove a non-member in the following format: z_email/domain.org.za(a)domain.org.za The reported error from Postorius was: "The user could not be removed" I used https://verifalia.com/validate-email to validate the email address and it is syntactically correct. -- Brian Carpenter Harmonylists.com Emwd.com

2 4

Discard all mail with the subject "The resutls of your email commands"
by w.schoener＠alp.dillingen.de Sept. 29, 2020

Sept. 29, 2020

Hello, I am using mailman 3.2.1 for several mailing lists. My colleagues want me to stop all mails with the subject "The results of your email commands". I found some contributions here, but nowhere a solution for this question. Does anybody has any suggestion? Maybe I could try to handle this outside of mailman, but then I would have to pass this task on to someone I dont know .... :-( Thanks for all hints. :-) Wolfgang

3 5

New releases
by Abhilash Raj Sept. 25, 2020

Sept. 25, 2020

Hi Everyone, I am pleased to announce new stable releases for: - Postorius: 1.3.3 Changelog: https://docs.mailman3.org/projects/postorius/en/latest/news.html#id1 Download: https://pypi.org/project/postorius/1.3.3/ - Hyperkitty: 1.3.3 Changelog: https://hyperkitty.readthedocs.io/en/latest/news.html#id1 Download: https://pypi.org/project/HyperKitty/1.3.3rc1/ - Mailmanclient: 3.3.1 Changelog: https://docs.mailman3.org/projects/mailmanclient/en/latest/src/mailmanclien… Download: https://pypi.org/project/mailmanclient/3.3.1/ - Django-mailman3: 1.3.3 Changelog: https://gitlab.com/mailman/django-mailman3/-/blob/master/README.rst Download: https://pypi.org/project/django-mailman3/1.3.3 Python 3.6+ and Django 2.0+ is supported for all of them. Django 3.0 support for Hyperkitty requires manually upgrading a dependency (django-haystack>=3.0b2, once a stable version of this has been released, it shouldn't require manually upgrading). There are tons of bug-fixes across the board and some new features. Biggest visible change is switch to Bootstrap 4, which has been long pending for us. Bootstrap 4 completely changes the CSS grid model using the new Flexbox. There might be some small changes or breakages when using on mobile. Please report such issues to us via Gitlab! Some other notable changes are in Postorius, which includes many more list settings exposed include content filtering settings, bounce processing (which was added in the previous release of Mailman Core) settings and some other ones. Settings page is also slightly different with all the sections on the vertical menu on left instead of horizontal tabs. You can now also specify a reason when rejecting held messages. There was also a gnarly bug, which caused the name of some members to be the string "None". For the longest time, I couldn't figure out the reason for it, but it ended up being a simple fix in mailmanclient's json serialization of display_name, which would result in Python's None value being passed as string "None" to Mailman's API for subscription. There is also better support for filtering visible lists based on the current vhost, which I see a few people are already waiting for from mailman-users list. A full changelog has been added to each project in the top. -- thanks, Abhilash Raj (maxking)

5 23

My Server is unable to connect to Mailman REST API few times
by Shashikanth Komandoor Sept. 24, 2020

Sept. 24, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 with PostgreSQL 11.7 version with default values in production environment from the past 4 months almost. As of now, we are having around 1327 lists created on this. When I am trying to do some operations like creating the lists, deleting the lists or accessing the lists through the GUI, I am getting the below error. If I am trying to do the operations through API or through mailman shell, still I am not able to connect to the API. Something went wrong Mailman REST API not available. Please start Mailman core. But my mailman core was working fine in the background. At the same time I was able to do other operations on a few other lists. By the time I am getting the above error, the mailman.log recorded the below messages. *[2020-09-16 12:49:08 +0530] [2600] [CRITICAL] WORKER TIMEOUT (pid:20234)* *[2020-09-16 12:49:08 +0530] [20234] [INFO] Worker exiting (pid: 20234)* *[2020-09-16 12:49:09 +0530] [21042] [INFO] Booting worker with pid: 21042* My mailman.cfg configuration is as below. The timeout value is the default value. I did not set any customized value. *(venv3) [root@lsmgr mailman]# grep -v ^# /var/lib/mailman/mailman/var/etc/mailman.cfg* *[archiver.hyperkitty]* *class: mailman_hyperkitty.Archiver* *enable: yes* *configuration: /var/lib/mailman/mailman-hyperkitty/mailman-hyperkitty.cfg* *[mta]* *incoming: mailman.mta.postfix.LMTP* *outgoing: mailman.mta.deliver.deliver* *lmtp_host: 0.0.0.0* *lmtp_port: 8024* *smtp_host: localhost* *smtp_port: 25* *[webservice]* *workers: 10* *[database]* *class: mailman.database.postgresql.PostgreSQLDatabase* *url: postgres://<postgresdbuser>:<postgresdbpassword>@127.0.0.1/mailman <http://127.0.0.1/mailman>* Then as per the suggestion I got earlier I configured the [webservice] section in the above file as below. *[webservice]* *configuration: /var/lib/mailman/mailman/var/etc/gunicorn.cfg* * [root@lsmgr logs]# cat /var/lib/mailman/mailman/var/etc/gunicorn.cfg* *[gunicorn]* *workers = 10* *timeout = 90 * After the above configuration, I found many errors like below in mailman.log file: *sqlalchemy.exc.NoSuchColumnError: "Could not locate column in row for column 'pended.id <http://pended.id>'"* *sqlalchemy.exc.ResourceClosedError: This result object does not return rows. It has been closed automatically.* *sqlalchemy.exc.DatabaseError: (psycopg2.DatabaseError) error with status PGRES_TUPLES_OK and no message from the libpq* The above might be few of the errors. FYI, for the creation of each list, it is taking almost around 15 to 20 minutes. After multiple times of the above error messages, at some time, I am fortunately getting the list created or some other operation getting done. I found the same scenario when the workers are from default 2 to 10. I don't understand where exactly I need to focus to solve the issue. Please let me know if I have to share any other details for you to suggest to me. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

3 9

including a template failed
by Wolfgang Bock Sept. 24, 2020

Sept. 24, 2020

Hi, I created a new mailinglist and got during the test-process the following errormessage in my mailman.log after: ... Sep 19 22:55:08 2020 (1433) ACCEPT: <000001d68ec7$2553e6e0$6ffbb4a0$(a)domain-01.de> Errors: Sep 19 22:55:09 2020 (1436) Cannot connect to SMTP server localhost on port 25 HTTPSConnectionPool(host='webmail.domain-02.de', port=443): Max retries exceeded with url: /mailman3/postorius/api/templates/list/mylist.lists.domain-03.de/list:member :regular:footer (Caused by NewConnectionError('<urllib3.connec tion.VerifiedHTTPSConnection object at 0x7fc8380f1748>: Failed to establish a new connection: [Errno -2] Name or service not known')) ... domain02.de isn't involved in mailman3 either as a user domain nor as a list-domain. After deleting the template mailman3/postorius/api/templates/list/mylist.lists.domain-03.de/list:member: regular:footer the mail to the list is processed without problems: Sep 19 22:56:22 2020 (1436) <000001d68ec7$2553e6e0$6ffbb4a0$(a)domain-01.de> smtp to mylist(a)list.domain-03.de for 1 recips, completed in 0.21389174461364746 seconds Sep 19 22:56:22 2020 (1436) <000001d68ec7$2553e6e0$6ffbb4a0$(a)wbock.de> post to mylist(a)list.domain-03.de from user(a)domain-01.de, 1331 bytes Please help to solve this problem? Thanks and regards Wolfgang

2 3

Missing whitespace in postfix_vmap after mailman genaliases
by Wolfgang Bock Sept. 23, 2020

Sept. 23, 2020

Hi, after creating a new list I got the following errormessage: mailman aliases -> postmap: warning: /var/lib/mailman3/data/postfix_vmap, line 17: expected format: key whitespace value /var/lib/mailman3/data/postfix_vmap # AUTOMATICALLY GENERATED BY MAILMAN ON 2020-09-19 07:44:34 .... xxxxxxxxxxx(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-bounces(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx-bounces(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-confirm(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx-confirm(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-join(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx-join(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-leave(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx-leave(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-owner(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx-owner(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-request(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx-request(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-subscribe(a)lists.xxxxxxxxxxxxxxxx.de xxxxxxxxxxx-subscribe(a)xxxxxxxxxxxxx.de xxxxxxxxxxx-unsubscribe@lists.xxxxxxxxxxxxxxxx.dexxxxxxxxxxx-unsubscribe@xxx xxxxxxxxxx.de The last line in the left part contains 48 chars. I solved the problem by adding a whitespace in the last line and I made a new postmap for postfix_vmap. But it would be better to solve the problem by changing the genaliases process in the next update. Regards Wolfgang

2 3

Re: cc'd e-mail addresses rewritten with @invalid.domain
by Williams, Peter B Sept. 23, 2020

Sept. 23, 2020

Hi Mark, Thanks for the help with this! Other list members will also see the e-mail as coming from user(a)invalid.domain<mailto:user@invalid.domain>. I will continue testing the other scenarios and will reply back as soon as possible. Thanks again for the help with this and have a nice day! Peter On Mon, Sep 21, 2020 at 9:00 PM Mark Sapiro <mark(a)msapiro.net> wrote: On 9/21/20 10:49 AM, peterbw(a)gmail.com<mailto:peterbw@gmail.com> wrote: > Hi, > > We've recently noticed an issue where users who are cc'd in a message where a mailing list is also within the cc list are getting rewritten a user(a)invalid.domain. > > This issue looks like it may be related to Outlook and how user names are displayed specifically. Here is an example: > > To: test_user(a)gmail.com<mailto:test_user@gmail.com> > cc: listserv(a)lists.test.org<mailto:listserv@lists.test.org>; Williams, Peter; > > "Williams, Peter" maps to a user e-mail in the Outlook Global Address book. When the message is sent the list will send the message with the first name and last name separated, for example the message will appear: > > to: test_user(a)gmail.com<mailto:test_user@gmail.com> > cc: listserv(a)lists.test.org<mailto:listserv@lists.test.org>, Williams(a)invalid.domain, Peter(a)invalid.domain Because apparently Outlook is sending the message with the literal > Cc: listserv(a)lists.test.org<mailto:listserv@lists.test.org>; Williams, Peter; instead of something like > Cc: listserv(a)lists.test.org<mailto:listserv@lists.test.org>, "Williams, Peter" <peters_real_address(a)example.com<mailto:peters_real_address@example.com>> Then some MTA in the chain is seeing the unqualified addresses Williams and Peter and appending its own local domain. > This only seems to happen with users who are cc'd who are also members of the list that is being cc'd. For example in the scenario above my e-mail that is cc'd is also a member of listserv(a)lists.test.org<mailto:listserv@lists.test.org>. In this case, where do you see this? i.e., do other list members see it in the message they receive from the list? I don't know why that would be. I'm certain that Mailman is not involved in this and the Williams(a)invalid.domain and Peter(a)invalid.domain addresses are in the Cc: as received by Mailman. > This issue does not occur if the user e-mail address is listed before the mailing list in the cc field. So for example, if the cc in the scenario above contained Williams, Peter; listserv(a)lists.test.org<mailto:listserv@lists.test.org>; it would route properly. Again, I think this is Outlook. What's in the Cc: of the mail that test_user(a)gmail.com<mailto:test_user@gmail.com> receives directly? What happens if you send mail in this way with To: test_user(a)gmail.com<mailto:test_user@gmail.com> cc: other_user(a)gmail.com<mailto:other_user@gmail.com>; Williams, Peter; Again, what's in the Cc: of the mail that test_user(a)gmail.com<mailto:test_user@gmail.com> and other_user(a)gmail.com<mailto:other_user@gmail.com> receive? Also, please see <https://wiki.list.org/DOC/Mailman%20is%20not%20Listserv>. -- Mark Sapiro <mark(a)msapiro.net<mailto:mark@msapiro.net>> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan _______________________________________________ Mailman-users mailing list -- mailman-users(a)mailman3.org<mailto:mailman-users@mailman3.org> To unsubscribe send an email to mailman-users-leave(a)mailman3.org<mailto:mailman-users-leave@mailman3.org> https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/

3 4

Mails are not archived at all -- how to check if Hyperkitty is running or not?
by Franklin Weng Sept. 23, 2020

Sept. 23, 2020

Hi, I set up the mailman3 services and lists, and we can send mail to the list successfully. However in the Archive section I couldn't see anything and all the lists were "inactive" and hence were hidden by default. I confirmed that api_key set in the /etc/mailman3/mailman-hyperkitty.cfg and /etc/mailman3/mailman-web.py is the same. I also confirmed that the apache2 wsgi module has been loaded. In the mailman.cfg database is set to mysql and in the mailman-web.py database is set to sqlite3. Does it matter? I tried to search but couldn't find any further information or discussion about this. There is no systemd service for Hyperkitty. How can I check if Hyperkitty is running or not? Thanks, Franklin

6 18

API timeout for one list
by Seth Seeger Sept. 23, 2020

Sept. 23, 2020

I apologize, because I think this was talked about before, but I could not find it in the archives. For one list, the REST API times out. Doesn’t seem to matter which page I try to go to. The uwsgi-error.log entry: --- Logging error --- Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/django/db/utils.py", line 96, in inner return func(*args, **kwargs) psycopg2.ProgrammingError: no results to fetch The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 332, in pusher task_set = broker.dequeue() File "/usr/lib/python3.8/site-packages/django_q/brokers/orm.py", line 67, in dequeue if tasks: File "/usr/lib/python3.8/site-packages/django/db/models/query.py", line 278, in __bool__ self._fetch_all() File "/usr/lib/python3.8/site-packages/django/db/models/query.py", line 1242, in _fetch_all self._result_cache = list(self._iterable_class(self)) File "/usr/lib/python3.8/site-packages/django/db/models/query.py", line 55, in __iter__ results = compiler.execute_sql(chunked_fetch=self.chunked_fetch, chunk_size=self.chunk_size) File "/usr/lib/python3.8/site-packages/django/db/models/sql/compiler.py", line 1175, in execute_sql return list(result) File "/usr/lib/python3.8/site-packages/django/db/models/sql/compiler.py", line 1554, in cursor_iter for rows in iter((lambda: cursor.fetchmany(itersize)), sentinel): File "/usr/lib/python3.8/site-packages/django/db/models/sql/compiler.py", line 1554, in <lambda> for rows in iter((lambda: cursor.fetchmany(itersize)), sentinel): File "/usr/lib/python3.8/site-packages/django/db/utils.py", line 96, in inner return func(*args, **kwargs) File "/usr/lib/python3.8/site-packages/django/db/utils.py", line 89, in __exit__ raise dj_exc_value.with_traceback(traceback) from exc_value File "/usr/lib/python3.8/site-packages/django/db/utils.py", line 96, in inner return func(*args, **kwargs) django.db.utils.ProgrammingError: no results to fetch During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.8/logging/__init__.py", line 1081, in emit msg = self.format(record) File "/usr/lib/python3.8/logging/__init__.py", line 925, in format return fmt.format(record) File "/usr/lib/python3.8/logging/__init__.py", line 664, in format record.message = record.getMessage() File "/usr/lib/python3.8/logging/__init__.py", line 369, in getMessage msg = msg % self.args TypeError: not all arguments converted during string formatting Call stack: File "./manage.py", line 10, in <module> execute_from_command_line(sys.argv) File "/usr/lib/python3.8/site-packages/django/core/management/__init__.py", line 381, in execute_from_command_line utility.execute() File "/usr/lib/python3.8/site-packages/django/core/management/__init__.py", line 375, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/usr/lib/python3.8/site-packages/django/core/management/base.py", line 323, in run_from_argv self.execute(*args, **cmd_options) File "/usr/lib/python3.8/site-packages/django/core/management/base.py", line 364, in execute output = self.handle(*args, **options) File "/usr/lib/python3.8/site-packages/django_q/management/commands/qcluster.py", line 22, in handle q.start() File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 67, in start self.sentinel.start() File "/usr/lib/python3.8/multiprocessing/process.py", line 121, in start self._popen = self._Popen(self) File "/usr/lib/python3.8/multiprocessing/context.py", line 224, in _Popen return _default_context.get_context().Process._Popen(process_obj) File "/usr/lib/python3.8/multiprocessing/context.py", line 277, in _Popen return Popen(process_obj) File "/usr/lib/python3.8/multiprocessing/popen_fork.py", line 19, in __init__ self._launch(process_obj) File "/usr/lib/python3.8/multiprocessing/popen_fork.py", line 75, in _launch code = process_obj._bootstrap(parent_sentinel=child_r) File "/usr/lib/python3.8/multiprocessing/process.py", line 315, in _bootstrap self.run() File "/usr/lib/python3.8/multiprocessing/process.py", line 108, in run self._target(*self._args, **self._kwargs) File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 157, in __init__ self.start() File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 162, in start self.guard() File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 268, in guard self.reincarnate(self.pusher) File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 210, in reincarnate self.pusher = self.spawn_pusher() File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 190, in spawn_pusher return self.spawn_process(pusher, self.task_queue, self.event_out, self.broker) File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 186, in spawn_process p.start() File "/usr/lib/python3.8/multiprocessing/process.py", line 121, in start self._popen = self._Popen(self) File "/usr/lib/python3.8/multiprocessing/context.py", line 224, in _Popen return _default_context.get_context().Process._Popen(process_obj) File "/usr/lib/python3.8/multiprocessing/context.py", line 277, in _Popen return Popen(process_obj) File "/usr/lib/python3.8/multiprocessing/popen_fork.py", line 19, in __init__ self._launch(process_obj) File "/usr/lib/python3.8/multiprocessing/popen_fork.py", line 75, in _launch code = process_obj._bootstrap(parent_sentinel=child_r) File "/usr/lib/python3.8/multiprocessing/process.py", line 315, in _bootstrap self.run() File "/usr/lib/python3.8/multiprocessing/process.py", line 108, in run self._target(*self._args, **self._kwargs) File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 334, in pusher logger.error(e, traceback.format_exc()) Message: ProgrammingError('no results to fetch') Arguments: ('Traceback (most recent call last):\n File "/usr/lib/python3.8/site-packages/django/db/utils.py", line 96, in inner\n return func(*args, **kwargs)\npsycopg2.ProgrammingError: no results to fetch\n \nThe above exception was the direct cause of the following exception:\n\nTraceback (most recent call last):\n File "/usr/lib/python3.8/site-packages/django_q/cluster.py", line 332, in pusher\n task_set = bro ker.dequeue()\n File "/usr/lib/python3.8/site-packages/django_q/brokers/orm.py", line 67, in dequeue\n if tasks:\n File "/usr/lib/python3.8/site-packages/django/db/models/query.py", line 278, in __bool__\n self._fetch_all()\n File "/usr/lib/python3.8/site-packages/django/db/models/query.py", line 1242, in _fetch_all\n self._result_cache = list(self._iterable_class(self))\n File "/usr/lib/python3.8/site-packa ges/django/db/models/query.py", line 55, in __iter__\n results = compiler.execute_sql(chunked_fetch=self.chunked_fetch, chunk_size=self.chunk_size)\n File "/usr/lib/python3.8/site-packages/django/db/models/sq l/compiler.py", line 1175, in execute_sql\n return list(result)\n File "/usr/lib/python3.8/site-packages/django/db/models/sql/compiler.py", line 1554, in cursor_iter\n for rows in iter((lambda: cursor.fetc hmany(itersize)), sentinel):\n File "/usr/lib/python3.8/site-packages/django/db/models/sql/compiler.py", line 1554, in <lambda>\n for rows in iter((lambda: cursor.fetchmany(itersize)), sentinel):\n File "/us r/lib/python3.8/site-packages/django/db/utils.py", line 96, in inner\n return func(*args, **kwargs)\n File "/usr/lib/python3.8/site-packages/django/db/utils.py", line 89, in __exit__\n raise dj_exc_value.w ith_traceback(traceback) from exc_value\n File "/usr/lib/python3.8/site-packages/django/db/utils.py", line 96, in inner\n return func(*args, **kwargs)\ndjango.db.utils.ProgrammingError: no results to fetch\n' ,) The other lists work fine. Thank you, Seth

3 4

The message is larger than the 40 KB maximum size
by Mohsen Masoudfar Sept. 22, 2020

Sept. 22, 2020

Hi, I am trying to find how I may change this. I have an attachment of 800 KB, and when I post it to the list, I do not get any response and nothing is hold. It looks like the message is just dropped. Best regards Mohsen Masoudfar Lead System Analyst, IT Operation American Association for the Advancement of Science 1200 New York Ave, NW, Washington, DC 20005 202-326-7087

3 9

Problem with list creation
by Pawel Grzywaczewski Sept. 22, 2020

Sept. 22, 2020

Hi, We want to create thousand of lists. We use a simple curl command curl --user restadmin:restpass -X POST http://localhost:8001/3.1/lists -d fqdn_listname=nameOfTheList(a)example.com After creating ~2k of them we started getting errors in Mailman logs: ``` [2020-09-16 17:11:10 +0200] [4564] [DEBUG] POST /3.1/lists [2020-09-16 17:11:41 +0200] [1339] [CRITICAL] WORKER TIMEOUT (pid:4564) [2020-09-16 17:11:41 +0200] [4564] [INFO] Worker exiting (pid: 4564) [2020-09-16 17:11:41 +0200] [5019] [INFO] Booting worker with pid: 5019 ``` Since then creation fails in most cases. We increased timeout in mailman.cfg ``` [gunicorn] workers: 4 timeout: 900 ``` And we increased timeout in nginx ``` http { # MODIF UNICORN proxy_connect_timeout 300s; proxy_read_timeout 300s; # MODIF UNICORN ``` Where might be the problem? How to start investigating and fix it? Thanks, Paweł

4 7

cc'd e-mail addresses rewritten with @invalid.domain
by peterbw＠gmail.com Sept. 22, 2020

Sept. 22, 2020

Hi, We've recently noticed an issue where users who are cc'd in a message where a mailing list is also within the cc list are getting rewritten a user(a)invalid.domain. This issue looks like it may be related to Outlook and how user names are displayed specifically. Here is an example: To: test_user(a)gmail.com cc: listserv(a)lists.test.org; Williams, Peter; "Williams, Peter" maps to a user e-mail in the Outlook Global Address book. When the message is sent the list will send the message with the first name and last name separated, for example the message will appear: to: test_user(a)gmail.com cc: listserv(a)lists.test.org, Williams(a)invalid.domain, Peter(a)invalid.domain This only seems to happen with users who are cc'd who are also members of the list that is being cc'd. For example in the scenario above my e-mail that is cc'd is also a member of listserv(a)lists.test.org. This issue does not occur if the user e-mail address is listed before the mailing list in the cc field. So for example, if the cc in the scenario above contained Williams, Peter; listserv(a)lists.test.org; it would route properly. Do you know what may be causing this? Please let me know if there is any additional information I may provide regarding this and I will try to respond as soon as possible. Thanks and have a nice day! Peter

2 1

Template path
by Seth Seeger Sept. 21, 2020

Sept. 21, 2020

Hello everyone, I’m running Mailman from Docker containers, without much customization. (Postorius 1.3.3, Core 3.3.1, API 3.1, Python 3.8.5). I’ve created a list:user:notice:welcome template, and when I try to confirm a subscription, I get an error. I followed previous emails on this list which told me to set POSTORIUS_TEMPLATE_BASE_URL in /opt/mailman/web/settings_local.py, but that doesn’t seem to make any difference. (I set it to a different value and the error message didn’t change. I also tried setting it in /opt/mailman/core/settings_local.py to no effect. After each change, I restarted mailman-web and mailman-core containers.) From within mailman-web and mailman-core containers, I can reach “mailman-web:8000”. In the webpage, I see: Mailman REST API not available. Please start Mailman core. In /opt/mailman/core/var/logs/mailman.log, I get: [17/Sep/2020:16:23:29 +0000] "GET /3.1/lists/xxx.example.com HTTP/1.1" 200 416 "-" "GNU Mailman REST client v3.3.1" Sep 17 16:23:35 2020 (48) deque: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 426, in _make_request six.raise_from(e, None) File "<string>", line 3, in raise_from File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 421, in _make_request httplib_response = conn.getresponse() File "/usr/lib/python3.8/http/client.py", line 1347, in getresponse response.begin() File "/usr/lib/python3.8/http/client.py", line 307, in begin version, status, reason = self._read_status() File "/usr/lib/python3.8/http/client.py", line 268, in _read_status line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1") File "/usr/lib/python3.8/socket.py", line 669, in readinto return self._sock.recv_into(b) socket.timeout: timed out During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/requests/adapters.py", line 439, in send resp = conn.urlopen( File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 724, in urlopen retries = retries.increment( File "/usr/lib/python3.8/site-packages/urllib3/util/retry.py", line 403, in increment raise six.reraise(type(error), error, _stacktrace) File "/usr/lib/python3.8/site-packages/urllib3/packages/six.py", line 735, in reraise raise value File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 670, in urlopen httplib_response = self._make_request( File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 428, in _make_request self._raise_timeout(err=e, url=url, timeout_value=read_timeout) File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 335, in _raise_timeout raise ReadTimeoutError( urllib3.exceptions.ReadTimeoutError: HTTPConnectionPool(host='mailman-web', port=8000): Read timed out. (read timeout=5) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/mailman/app/workflow.py", line 69, in __next__ return step() File "/usr/lib/python3.8/site-packages/mailman/app/subscriptions.py", line 332, in _step_do_subscription self.member = self.mlist.subscribe( File "/usr/lib/python3.8/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3.8/site-packages/mailman/model/mailinglist.py", line 505, in subscribe notify(SubscriptionEvent( File "/usr/lib/python3.8/site-packages/zope/event/__init__.py", line 32, in notify subscriber(event) File "/usr/lib/python3.8/site-packages/mailman/app/membership.py", line 176, in handle_SubscriptionEvent send_welcome_message(mlist, member, member.preferred_language) File "/usr/lib/python3.8/site-packages/mailman/app/notifications.py", line 51, in send_welcome_message welcome_message = wrap(getUtility(ITemplateLoader).get( File "/usr/lib/python3.8/site-packages/mailman/model/template.py", line 188, in get contents = getUtility(ITemplateManager).get( File "/usr/lib/python3.8/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3.8/site-packages/mailman/model/template.py", line 110, in get contents = protocols.get(actual_uri, **auth) File "/usr/lib/python3.8/site-packages/mailman/utilities/protocols.py", line 38, in get response = requests.get(url, timeout=REQUEST_TIMEOUT, **kws) File "/usr/lib/python3.8/site-packages/requests/api.py", line 76, in get return request('get', url, params=params, **kwargs) File "/usr/lib/python3.8/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/usr/lib/python3.8/site-packages/requests/sessions.py", line 530, in request resp = self.send(prep, **send_kwargs) File "/usr/lib/python3.8/site-packages/requests/sessions.py", line 643, in send r = adapter.send(request, **kwargs) File "/usr/lib/python3.8/site-packages/requests/adapters.py", line 529, in send raise ReadTimeout(e, request=request) requests.exceptions.ReadTimeout: HTTPConnectionPool(host='mailman-web', port=8000): Read timed out. (read timeout=5) [2020-09-17 16:23:35 +0000] [48] [ERROR] Socket error processing request. Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 426, in _make_request six.raise_from(e, None) File "<string>", line 3, in raise_from File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 421, in _make_request httplib_response = conn.getresponse() File "/usr/lib/python3.8/http/client.py", line 1347, in getresponse response.begin() File "/usr/lib/python3.8/http/client.py", line 307, in begin version, status, reason = self._read_status() File "/usr/lib/python3.8/http/client.py", line 268, in _read_status line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1") File "/usr/lib/python3.8/socket.py", line 669, in readinto return self._sock.recv_into(b) socket.timeout: timed out Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/requests/adapters.py", line 439, in send resp = conn.urlopen( File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 724, in urlopen retries = retries.increment( File "/usr/lib/python3.8/site-packages/urllib3/util/retry.py", line 403, in increment raise six.reraise(type(error), error, _stacktrace) File "/usr/lib/python3.8/site-packages/urllib3/packages/six.py", line 735, in reraise raise value File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 670, in urlopen httplib_response = self._make_request( File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 428, in _make_request self._raise_timeout(err=e, url=url, timeout_value=read_timeout) File "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 335, in _raise_timeout raise ReadTimeoutError( urllib3.exceptions.ReadTimeoutError: HTTPConnectionPool(host='mailman-web', port=8000): Read timed out. (read timeout=5) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/gunicorn/workers/sync.py", line 135, in handle self.handle_request(listener, req, client, addr) File "/usr/lib/python3.8/site-packages/gunicorn/workers/sync.py", line 191, in handle_request six.reraise(*sys.exc_info()) File "/usr/lib/python3.8/site-packages/gunicorn/six.py", line 625, in reraise raise value File "/usr/lib/python3.8/site-packages/gunicorn/workers/sync.py", line 176, in handle_request respiter = self.wsgi(environ, resp.start_response) File "/usr/lib/python3.8/site-packages/mailman/database/transaction.py", line 50, in wrapper rtn = function(*args, **kws) File "/usr/lib/python3.8/site-packages/mailman/rest/wsgiapp.py", line 193, in __call__ return super().__call__(environ, start_response) File "/usr/lib/python3.8/site-packages/falcon/api.py", line 269, in __call__ responder(req, resp, **params) File "/usr/lib/python3.8/site-packages/mailman/rest/sub_moderation.py", line 88, in on_post self._registrar.confirm(self._token) File "/usr/lib/python3.8/site-packages/mailman/app/subscriptions.py", line 559, in confirm list(workflow) File "/usr/lib/python3.8/site-packages/mailman/app/workflow.py", line 69, in __next__ return step() File "/usr/lib/python3.8/site-packages/mailman/app/subscriptions.py", line 332, in _step_do_subscription self.member = self.mlist.subscribe( File "/usr/lib/python3.8/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3.8/site-packages/mailman/model/mailinglist.py", line 505, in subscribe notify(SubscriptionEvent( File "/usr/lib/python3.8/site-packages/zope/event/__init__.py", line 32, in notify subscriber(event) File "/usr/lib/python3.8/site-packages/mailman/app/membership.py", line 176, in handle_SubscriptionEvent send_welcome_message(mlist, member, member.preferred_language) File "/usr/lib/python3.8/site-packages/mailman/app/notifications.py", line 51, in send_welcome_message welcome_message = wrap(getUtility(ITemplateLoader).get( File "/usr/lib/python3.8/site-packages/mailman/model/template.py", line 188, in get contents = getUtility(ITemplateManager).get( File "/usr/lib/python3.8/site-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3.8/site-packages/mailman/model/template.py", line 110, in get contents = protocols.get(actual_uri, **auth) File "/usr/lib/python3.8/site-packages/mailman/utilities/protocols.py", line 38, in get response = requests.get(url, timeout=REQUEST_TIMEOUT, **kws) File "/usr/lib/python3.8/site-packages/requests/api.py", line 76, in get return request('get', url, params=params, **kwargs) File "/usr/lib/python3.8/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/usr/lib/python3.8/site-packages/requests/sessions.py", line 530, in request resp = self.send(prep, **send_kwargs) File "/usr/lib/python3.8/site-packages/requests/sessions.py", line 643, in send r = adapter.send(request, **kwargs) File "/usr/lib/python3.8/site-packages/requests/adapters.py", line 529, in send raise ReadTimeout(e, request=request) requests.exceptions.ReadTimeout: HTTPConnectionPool(host='mailman-web', port=8000): Read timed out. (read timeout=5) What’s the next step to get templates working? Thank you, Seth

3 8

Redundant and load balanced Mailman3
by Pawel Grzywaczewski Sept. 20, 2020

Sept. 20, 2020

Hi, Can someone share some hints about how to deploy redundant and load balanced Mailman3? What are your recommendations and best practices? For example what components to put on the same VM? Can we have 2VM with Mailman core/Postorious/Hyperkitty/django-mailman/mailmanclient connecting to one (the same) database? How to load balance mail routing (incoming)? Thanks! Paweł

3 3

Bad Signature with Gmail
by Massimo Zappalà Sept. 19, 2020

Sept. 19, 2020

Hi everyone, if I write a my lists from other email address I get the correct message: opendkim[23516]: 8EEE440FFD: DKIM-Signature field added (s=mailselector, d=catania.linux.it). While if I write to a my lists from email address Gmail, on opendkim I get the following messages: opendkim[23516]: BA95241952: no signing table match for 'maszap69(a)gmail.com' opendkim[23516]: BA95241952: s=20161025 d=gmail.com SSL error:04091068:rsa routines:int_rsa_verify:bad signature opendkim[23516]: BA95241952: bad signature data The message is received regularly by all members of the list. I also receive an email at superuser: [Django] ERROR (EXTERNAL IP): Internal Server Error: /hyperkitty/api/mailman/archive Internal Server Error: /hyperkitty/api/mailman/archive OperationalError at /hyperkitty/api/mailman/archive (1366, "Incorrect string value: '\\xF0\\x9F\\x98\\xB1\\xF0\\x9F...' for column `mailman3web`.`hyperkitty_email`.`content` at row 1") ... If I check with mail-tester I get 10/10 If I check with dmarcanalyzer I get "This seems to be a valid DKIM Record." I don't understand where the problem is. Could anyone tell me how to solve? Thank you in advance Max

2 4

Can creating too many Django accounts crash Mailman3 server?
by Mohsen Masoudfar Sept. 19, 2020

Sept. 19, 2020

Hi, It seems anybody can go to the site: https://LISTSERVNAME/mailman3/postorius/lists/ and click on the [Sign up] on the top-right corner and create an account. This can easily be automated, even though the next step, confirming the email address, being ignored. I believe it can be used as a target for a DOS attack by creating so many accounts, that eventually causes an 'out of space' error. Is this a justified concern? Is there a way to manage this feature in a secure way? Best regards Mohsen Masoudfar Lead System Analyst, IT Operation American Association for the Advancement of Science 1200 New York Ave, NW, Washington, DC 20005 202-326-7087

4 3

Office365 posts shunted (authres.core.SyntaxError)
by Bryan Loniewski Sept. 19, 2020

Sept. 19, 2020

Hi again -- Besides my compress issue described earlier today here: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… I've been dealing with another issue (and why I upgraded to the latest code) when posting messages to my test list from our schools Office365 infrastructure (OWA). The post gets shunted; mailman.log has the following error: Sep 11 11:29:44 2020 (31396) ACCEPT: <BL0PR14MB3681E636E905E9D34588C85088240(a)BL0PR14MB3681.namprd14.prod.outlook.com> Sep 11 11:29:45 2020 (31401) Uncaught runner exception: Syntax error: Expected "=" at: ; dmarc=none action=none header.from=o... Sep 11 11:29:45 2020 (31401) Traceback (most recent call last): File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/core/runner.py", line 173, in _one_iteration self._process_one_file(msg, msgdata) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/core/runner.py", line 266, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/runners/pipeline.py", line 37, in _dispose process(mlist, msg, msgdata, pipeline) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/core/pipelines.py", line 50, in process handler.process(mlist, msg, msgdata) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/handlers/validate_authenticity.py", line 118, in process authenticate(msg, msgdata) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/utilities/retry.py", line 44, in f_retry return f(*args, **kwargs) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/handlers/validate_authenticity.py", line 85, in authenticate prev = trusted_auth_res(msg) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/mailman/handlers/validate_authenticity.py", line 73, in trusted_auth_res authserv_id = AuthenticationResultsHeader.parse(header).authserv_id File "/opt/mailman/mm/venv/lib/python3.6/site-packages/authres/__init__.py", line 206, in parse return authres.core.AuthenticationResultsHeader.parse(core_features(), string) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/authres/core.py", line 442, in parse return self.parse_value(feature_context, string) File "/opt/mailman/mm/venv/lib/python3.6/site-packages/authres/core.py", line 454, in parse_value header._parse() File "/opt/mailman/mm/venv/lib/python3.6/site-packages/authres/core.py", line 517, in _parse result = self._parse_resinfo() File "/opt/mailman/mm/venv/lib/python3.6/site-packages/authres/core.py", line 550, in _parse_resinfo method, version, result = self._parse_methodspec() File "/opt/mailman/mm/venv/lib/python3.6/site-packages/authres/core.py", line 573, in _parse_methodspec raise SyntaxError('Expected "="', self._parse_text) authres.core.SyntaxError: Syntax error: Expected "=" at: ; dmarc=none action=none header.from=o... Sep 11 11:29:45 2020 (31401) SHUNTING: 1599838185.4911082+9dde922f77a1d66e3511f2709ec4b436ab6a3ecc Debugging the issue further shows this header to be the problem: authentication-results: lists-test.rutgers.edu; dkim=none (message not signed) header.d=none;lists-test.rutgers.edu; dmarc=none action=none header.from=oit.rutgers.edu; What is syntactically wrong with it and/or is it more than that? Note1: If I remove that header from a copy of the message and inject directly into Mailman it will deliver as expected. Note2: Posting messages from my personal Gmail account or cmdline mail program to the same test list will also deliver as expected. ________________________ Bryan Loniewski Rutgers University OIT:EAS:Messaging and Collaboration Services System Administrator

4 8

Re-send subscription response and file permission error in queue
by accounts-mailman＠holbrook.no Sept. 15, 2020

Sept. 15, 2020

A user sent subscription request to the `..-join@` address of a list. Email domain wasn't set up properly, so response got rejected. Now, if the user tries to send another request, no reponse comes back. In the log I find a python stack trace saying subscription already pending. ``` Sep 08 10:32:44 2020 (19918) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 171, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 264, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3/dist-packages/mailman/runners/command.py", line 196, in _dispose mlist, msg, msgdata, parts, results) File "/usr/lib/python3/dist-packages/mailman/commands/eml_membership.py", line 104, in process ISubscriptionManager(mlist).register(subscriber) File "/usr/lib/python3/dist-packages/mailman/app/subscriptions.py", line 520, in register list(workflow) File "/usr/lib/python3/dist-packages/mailman/app/workflow.py", line 69, in __next__ return step() File "/usr/lib/python3/dist-packages/mailman/app/subscriptions.py", line 227, in _step_sanity_checks raise SubscriptionPendingError(self.mlist, self.address.email) mailman.interfaces.subscriptions.SubscriptionPendingError ``` Furthermore I am getting a permission denied error in the attempt of shunting the message, which I don't quite understand because the folder has user `list` group `list` and `700` mode: ``` Sep 08 10:25:29 2020 (19918) SHUNTING: 1599553529.9889646+88be5afa0bf3111a83e68cc97ce2000723ad93fd Sep 08 10:29:49 2020 (19918) Uncaught runner exception: [Errno 13] Permission denied: '/var/lib/mailman3/queue/command/1599553789.306307+6fee74af69263553b5ffd0e73cc095ab651bd855.pck' Sep 08 10:29:49 2020 (19918) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mailman/core/runner.py", line 156, in _one_iteration msg, msgdata = self.switchboard.dequeue(filebase) File "/usr/lib/python3/dist-packages/mailman/core/switchboard.py", line 150, in dequeue with open(filename, 'rb') as fp: PermissionError: [Errno 13] Permission denied: '/var/lib/mailman3/queue/command/1599553789.306307+6fee74af69263553b5ffd0e73cc095ab651bd855.pck' ``` How can I remove the pending subscription, or re-send the response email? And what could be the cause of the permission error? Using mailman 3.1.1

2 4

Held Message view, JSONDecodeError: Invalid control character
by mm3＠hovo.id.au Sept. 15, 2020

Sept. 15, 2020

I am running the Debian 10 mailman3 and mailman3-web packages with mariadb. I received an email to the list from an invoicing software and now I am unable to view or accept this email from the list. All other lists seem to be still working fine. I'm guessing there is a piece of data in my database that is corrupt or unable to be decoded, but I am at a loss on how to find and fix it. Any help would be greatly appreciated ``` Sep 11 12:29:23 2020 (11577) 127.0.0.1 - - "GET /3.1/lists/redacted(a)redacted.com/held?count=0&page=1 HTTP/1.1" 200 90 Sep 11 12:29:23 2020 (11577) REST request handler error: Traceback (most recent call last): File "/usr/lib/python3.7/wsgiref/handlers.py", line 137, in run self.result = application(self.environ, self.start_response) File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 50, in wrapper rtn = function(*args, **kws) File "/usr/lib/python3/dist-packages/mailman/rest/wsgiapp.py", line 216, in __call__ return super().__call__(environ, start_response) File "falcon/api.py", line 215, in falcon.api.API.__call__ File "falcon/api.py", line 189, in falcon.api.API.__call__ File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 160, in on_get resource = self._make_collection(request) File "/usr/lib/python3/dist-packages/mailman/rest/helpers.py", line 159, in _make_collection for resource in collection] File "/usr/lib/python3/dist-packages/mailman/rest/helpers.py", line 159, in <listcomp> for resource in collection] File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 150, in _resource_as_dict resource = self._make_resource(request.id) File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 70, in _make_resource resource = super()._make_resource(request_id) File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 39, in _make_resource results = requests.get_request(request_id) File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3/dist-packages/mailman/model/requests.py", line 120, in get_request result.data_hash, expunge=False) File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 85, in wrapper return function(args[0], config.db.store, *args[1:], **kws) File "/usr/lib/python3/dist-packages/mailman/model/pending.py", line 142, in confirm value = json.loads(keyvalue.value) File "/usr/lib/python3.7/json/__init__.py", line 348, in loads return _default_decoder.decode(s) File "/usr/lib/python3.7/json/decoder.py", line 337, in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) File "/usr/lib/python3.7/json/decoder.py", line 353, in raw_decode obj, end = self.scan_once(s, idx) json.decoder.JSONDecodeError: Invalid control character at: line 1 column 21 (char 20) ```

2 2

Mailman3 throws 500 error (unicode encode) when loading held messages in Postorius
by Simon Handfield Sept. 14, 2020

Sept. 14, 2020

Hi, I have been working through other threads that indicate the same symptom (500 error when loading held_messages for a list). These include potential truncation of values in pendedkeyvalue table (don't this is our problem) and error when trying to access a message in /var/lib/mailman3/messages (ran the suggested code to loop through the stored files but no error was thrown.) Environment: Ubuntu 18.04 mailman3/bionic,now 3.1.1-9 all [installed,automatic] mailman3-full/bionic,now 3.1.1-9 all [installed] mailman3-web/bionic,now 0+20170523-14 all [installed,automatic] python-django-mailman3/bionic,now 1.1.0-4 all [installed,automatic] python-mailmanclient/bionic,now 3.1.1-5 all [installed,automatic] python3-mailman-hyperkitty/bionic,now 1.1.0-4 all [installed,automatic] Error reported in log with debug enabled: Traceback (most recent call last): File "/usr/lib/python3.6/wsgiref/handlers.py", line 137, in run self.result = application(self.environ, self.start_response) File "/usr/lib/python3/dist-packages/mailman/database/transaction.py", line 50, in wrapper rtn = function(*args, **kws) File "/usr/lib/python3/dist-packages/mailman/rest/wsgiapp.py", line 214, in __call__ return super().__call__(environ, start_response) File "falcon/api.py", line 215, in falcon.api.API.__call__ (falcon/api.c:2872) File "falcon/api.py", line 189, in falcon.api.API.__call__ (falcon/api.c:2419) File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 167, in on_get resource = self._make_collection(request) File "/usr/lib/python3/dist-packages/mailman/rest/helpers.py", line 159, in _make_collection for resource in collection] File "/usr/lib/python3/dist-packages/mailman/rest/helpers.py", line 159, in <listcomp> for resource in collection] File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 157, in _resource_as_dict resource = self._make_resource(request.id) File "/usr/lib/python3/dist-packages/mailman/rest/post_moderation.py", line 78, in _make_resource resource['msg'] = msg.as_string() File "/usr/lib/python3.6/email/message.py", line 158, in as_string g.flatten(self, unixfrom=unixfrom) File "/usr/lib/python3.6/email/generator.py", line 116, in flatten self._write(msg) File "/usr/lib/python3.6/email/generator.py", line 181, in _write self._dispatch(msg) File "/usr/lib/python3.6/email/generator.py", line 214, in _dispatch meth(msg) File "/usr/lib/python3.6/email/generator.py", line 272, in _handle_multipart g.flatten(part, unixfrom=False, linesep=self._NL) File "/usr/lib/python3.6/email/generator.py", line 116, in flatten self._write(msg) File "/usr/lib/python3.6/email/generator.py", line 181, in _write self._dispatch(msg) File "/usr/lib/python3.6/email/generator.py", line 214, in _dispatch meth(msg) File "/usr/lib/python3.6/email/generator.py", line 243, in _handle_text msg.set_payload(payload, charset) File "/usr/lib/python3.6/email/message.py", line 315, in set_payload payload = payload.encode(charset.output_charset) UnicodeEncodeError: 'ascii' codec can't encode characters in position 8-9: ordinal not in range(128) I'm sorry if this is a query that's answered already but I have not been able to find matching thread that seems to relate to my error. Thanks for any advice on where to look next. Cheers, Simon. _ [State Library of NSW]<https://www.sl.nsw.gov.au/> Simon Handfield Desktop and Infrastructure Leader simon.handfield(a)sl.nsw.gov.au<mailto:simon.handfield@sl.nsw.gov.au> +61 2 9273 1535 Macquarie Street, Sydney NSW 2000, Australia www.sl.nsw.gov.au<https://www.sl.nsw.gov.au/> This message is intended for the addressee named and may contain confidential information. If you are not the intended recipient, please delete it and notify the sender. Views expressed in this message are those of the individual sender, and are not necessarily the views of their organisation.

3 7

How to set the original sender to the Reply-To?
by Marcel Pietschmann Sept. 12, 2020

Sept. 12, 2020

Hi everybody, I have a settings problem. Mailman adds the original sender to the Reply-To or Cc in the case where there's a reply to setting in force on the list. In my case, mailman sets the sender always to Cc. How can i change it? Greets Marcel My settings: Personalize = None Anonymous list = No Reply to list = No Munging DMARC = Munge the From: header with list adress

2 1

Failed first login
by Massimo Zappalà Sept. 11, 2020

Sept. 11, 2020

Hi everyone, i installed mailman3-full on debian 10. During installation, it asks me to enter the admin user credentials. After configuration, I restart mailman3 and mailman3-web. When I try to log in for the first time by entering the admin credentials, a message warns me that the credentials are incorrect. I looked at the mailman logs, but I find nothing. It seems that it is a django authentication problem, because even in the django admin panel I can't log in. Looking at the mailman3web db, in the auth_user table, I see the admin user. How can I see why it does not accept the credentials? Thank you in advance

2 2

Affinity and Empathy Are Now Available
by Brian Carpenter Sept. 11, 2020

Sept. 11, 2020

Dear Mailman 3 Users, We have launched Affinity and Empathy and they now are part of our shared and cloud Mailman 3 hosting services. Affinity replaces Postorius and Empathy replaces Hyperkitty. You can read more at https://mailmanhost.com Please email me off-list if you have any questions. Brian Carpenter Harmony Lists

1 0

Messages disappearing into hole??
by Ruth Ivimey-Cook Sept. 11, 2020

Sept. 11, 2020

Folks, I have been trying to set up a mailing list that is mostly for message distribution, so there is a single sender of messages and multiple receivers, but the receivers are moderated. I wouldn't mind receiver messages being explicitly rejected but that's not an issue for now. I looked around the interface and decided to set up the sender as a non-member, as that appeared to permit them to be "special" and outside of the normal access rules for the list. Before I did that I could send a message from this sender and that would be sent to me as list owner for moderation, so both incoming (from my mailserver) and outgoing (to it) can be completed. However, with a non-member who is auto-accepted the message is passed from my mailserver to mailman and then disappears. I cannot find anything in the logs to indicate what happened next. I have tried setting the default non-member policy to both 'hold' and 'default' with no change in that behaviour. The logs for the mailserver show the message being sent to mailman; mailman's "smtp.log" shows an LMTP message being received ok, and then nothing. Any ideas how to find out what is going on? I can share config if that helps but not sure what would be useful. As a side-issue, at one point I added a regex matching the sender address to the acceptable members list, but find that I cannot now delete it (using postorius): If I delete the field and Save, it returns on page refresh. Regards, Ruth -- Software Manager & Engineer Blog: http://www.ivimey.org/blog LinkedIn: http://uk.linkedin.com/in/ruthivimeycook/

2 1

messages go to shunt queue
by Danil Smirnov Sept. 10, 2020

Sept. 10, 2020

Hi guys, I've faced weird Core behaviour after the last upgrade of the docker images. All the messages sent to a list now go straight to shunt queue with the following error in the logs: --- Sep 06 22:41:32 2020 (27) Uncaught runner exception: 0 Sep 06 22:41:32 2020 (27) Traceback (most recent call last): File "/usr/lib/python3.8/site-packages/mailman/core/runner.py", line 173, in _one_iteration self._process_one_file(msg, msgdata) File "/usr/lib/python3.8/site-packages/mailman/core/runner.py", line 266, in _process_one_file keepqueued = self._dispose(mlist, msg, msgdata) File "/usr/lib/python3.8/site-packages/mailman/runners/incoming.py", line 79, in _dispose process(mlist, msg, msgdata, start_chain) File "/usr/lib/python3.8/site-packages/mailman/core/chains.py", line 57, in process if link.rule.check(mlist, msg, msgdata): File "/usr/lib/python3.8/site-packages/mailman/rules/dmarc.py", line 314, in check if maybe_mitigate(mlist, address): File "/usr/lib/python3.8/site-packages/mailman/rules/dmarc.py", line 286, in maybe_mitigate answer = is_reject_or_quarantine( File "/usr/lib/python3.8/site-packages/mailman/rules/dmarc.py", line 217, in is_reject_or_quarantine for record in txt_rec.items[0].strings) KeyError: 0 Sep 06 22:41:32 2020 (27) SHUNTING: 1599432092.4326646+4cbb58a0dd5d9705946ca583835e63ec175536e3 I'm witnessing the same behaviour in two different installations for all the messages sent to list (with plain text body like "it's a test"). --- Any insight would be greatly appreciated! Danil Smirnov

2 2

Please help: Mailaman3 -
by Jane Anara Sept. 6, 2020

Sept. 6, 2020

Hello everyone, I hope my questions don't sound ridiculous. In my team, I have been tasked with moving our mailman installations from version 1:2.1 to the current version, mailman3. I followed the documentations online and installed all the components, created a Django project and configured settings.py and url.py. However, when I run the development server, I receive the following on the body of Postorius main page: Page not found This page either doesn't exist, or it moved somewhere else. Clicking on the "Lists" menu link, I receive the following: HTTP Error 404: <!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8"> <meta http-equiv="X-UA-Compatible" content="IE=edge"> <meta name="viewport" content="width=device-width, initial-scale=1"> <title>example.com</title> <link rel="shortcut icon" href="/static/postorius/img/favicon.ico"> <link rel="stylesheet" href="/static/postorius/libs/bootstrap/css/bootstrap.min.css"> <link rel="stylesheet" href="/static/django-mailman3/css/main.css"> <link rel="stylesheet" href="/static/postorius/css/style.css"> <link rel="stylesheet" href="/static/postorius/libs/fonts/font-awesome/css/font-awesome.min.css" type="text/css" media="all" />    </head> <body> <nav class="navbar navbar-expand-md navbar-light bg-light navbar-default"> <div class="container"> <div class="navbar-header"> <button type="button" class="navbar-toggler collapsed" data-toggle="collapse" data-target="#header-nav" aria-expanded="false"> <span class="sr-only">Toggle navigation</span> <span class="fa fa-bars"></span> </button> <a class="navbar-brand" href="/mailman3/lists/"><span><img src="/static/postorius/img/mailman_logo_small_trans.png" alt="Mailman logo"/> Postorius</span></a> </div> <div class="collapse navbar-collapse" id="header-nav"> <ul class="nav navbar-nav mr-auto"> <li class="nav-item"><a href="/mailman3/lists/" class="nav-link"> <span class="fa fa-envelope"></span> Lists </a></li> <li class="nav-item"><a href="/archives/" class="nav-link"> <span class="fa fa-comment"></span> Archives </a></li> </ul> <ul class="nav navbar-nav navbar-right"> <li class="nav-item"><a class="nav-link" href="/accounts/login/?next=/3.1/lists"> <span class="fa fa-sign-in"></span> Login </a></li> <li class="nav-item"><a class="nav-link" href="/accounts/signup/?next=/3.1/lists"> <span class="fa fa-user-plus"></span> Sign Up </a></li> </ul> </div> </div> </nav> <div class="container" role="main"> <h1>Page not found</h1> <div class="alert alert-danger">This page either doesn't exist, or it moved somewhere else.</div> </div> <footer class="footer"> <div class="container"> <p class="text-center"> <a href="https://postorius.readthedocs.org">Postorius Documentation</a> • <a href="http://list.org">GNU Mailman</a> • Postorius Version 1.3.3 • Happy Mailman Day! </p> </div> </footer> <script src="/static/postorius/libs/jquery/jquery-1.11.3.min.js"></script> <script src="https://cdnjs.cloudflare.com/ajax/libs/popper.js/1.11.0/umd/popper.min.js" integrity="sha384-b/U6ypiBEHpOf/4+1nzFpr53nxSS+GLCkfwBdFNTxtclqqenISfwAzpKaMNFNmj4" crossorigin="anonymous"></script> <script src="/static/postorius/libs/bootstrap/js/bootstrap.min.js"></script> <script src="/static/django-mailman3/js/main.js"></script> <script src="/static/postorius/js/script.js"></script> </body> </html> So far, the Postorious component is where there seem to be issues, all other link or component produce no errors thus far. Please advice on how I can troubleshoot this. I herein include the relevant sessions of my settings.py file and url.py which I have tweaked with various configurations to no avail. settings.py: # Application definition INSTALLED_APPS = [ # Apps added for mailman components 'hyperkitty', 'postorius', 'django_mailman3', 'mailmanclient', # Other useful apps 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', # end other useful apps 'django.contrib.sites', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.messages', 'django.contrib.staticfiles', ] url.py: urlpatterns = [ #Django admin path('admin/', admin.site.urls), path('mailman3/', include('postorius.urls')), path('archives/', include('hyperkitty.urls')), path('', include('django_mailman3.urls')), path('accounts/', include('allauth.urls')), #path('postorius', include('postorius.urls')), #path('lists/', list_index), path('search/', include('haystack.urls')), #url(r'^$', list_index), ] Note that when I uncomment the lines relating to list_index or use configurations similar to that on mailman-suit, I get: NameError: name 'list_index' is not defined. Looking forward to any help anyone can render. Thank you! Regards, Jane.

2 5

Struggling with log rotation in Docker context
by skenny＠scss.tcd.ie Sept. 5, 2020

Sept. 5, 2020

I'm running Mailman 3 via maxking's Docker implementation, and had an incident recently where something went badly wrong, and the file uwsgi-error.log filled up. As a consequence, so did the file system where that file resides,and things ground to a halt. The file is visible on the Docker host as /opt/mailman/web/logs/uwsgi-error.log. I am unsure about how to rotate this file correctly. I could use logrotate on the host, but I can't locate any documentation that describes how to signal the relevant processes inside the mailman-web container. (Maybe this should be done within the container?) I'd be grateful for any good advice on this. Stephen

2 5

mailman procesing small amount of mail, then stop process them like 30 seconds, and then loop back
by mathias.bedu＠epitech.eu Sept. 4, 2020

Sept. 4, 2020

Hi, I am currently trying to optimize my mailman installation, which is working. The only issue is that i see that mailman seems to process a few number of messages (around 50 each times), then stopping, and then processing few next messages. I spend quite some times searching for eventual parameters that could slow down. I precise that the machine itself is largely more powerful than what mailman is using. So my question is : could you give me some leads for potentials parameters or stuff like this that i could modify to optimize the installation ? Best regards, Mathias

2 2

Unsubscribe Notifications Clarification
by Brian Carpenter Sept. 3, 2020

Sept. 3, 2020

I am trying to understand how Mailman 3 handles unsubscribe notifications. From my testing I see the following behavior: 1. If list member sends email to listname-leave@listname, an unsubscribe notification is sent to both list owner and list member if list settings have them enabled. 2. If list list member is a registered user of Postorius and he uses Postorius to unsubscribe, then no notification is sent out to either list owner or list member, even if list settings has unsubscribe notifications enabled. Is this correct? Brian

2 2

adding imprint / private policy link to postorius
by Thomas Stein Sept. 3, 2020

Sept. 3, 2020

Hello one and all. Is it possible to add an imprint link to the postorius start page? I guess it is, but it would be nice if someone could me point to the right direction / documentation. Something like they have: https://lists.openrailwaymap.org/mailman3/postorius/lists/ cheers, t.

2 2

Timeout in Postorius when trying to approve or reject moderated messages
by Sebastian Hagedorn Aug. 30, 2020

Aug. 30, 2020

Hi, I just set up a new Mailman 3 Suite installation (GNU Mailman 3.3.1 (Tom Sawyer)) on CentOS 7 using the virtualenv installation guide: https://docs.mailman3.org/en/latest/install/virtualenv.html I encountered a few issues, but I was able to resolve all of them, I think. All three components of the suite are up and running. The backend is a MariaDB database, the frontend is Apache with mod_wsgi. I can send messages to the server, and they are delivered to list members. One thing that I can't figure out is why I can't approve or reject messages that are held for moderation. In case it matters, I'm trying to moderate the list using the "root" account. Discarding works, but when I try to either accept or reject a message, there is a timeout. I can't find anything in mailman.log, mailmansuite.log or even /var/log/httpd/access_log. I managed to reject and approve messages manually using mailmanclient and the REST API, so the issue appears to be somewhere between Postorius 1.3.3 and mailmancore. Any ideas? -- .:.Sebastian Hagedorn - Weyertal 121 (Gebäude 133), Zimmer 2.02.:. .:.Regionales Rechenzentrum (RRZK).:. .:.Universität zu Köln / Cologne University - ✆ +49-221-470-89578.:.

4 6

Throttle outgoing emails to a certain rate?
by arvid.teichtmann＠gmx.de Aug. 21, 2020

Aug. 21, 2020

Is there a possibility to throttle the sending of outgoing emails to a certain rate, e.g. 100 emails per hour, or to split them up into corresponding chunks? I run Mailman 2.1.33 on a hosted server and the provider only allows me to send a maximum of 100 emails per hour. The excess emails are also simply discarded and the sender and list administrator get a bunch of error emails. This is very annoying, especially because I didn't know about it and the problem only now occurs occasionally during operation... ;-( Thanks for all hints.

3 2

Spam sign ups
by Seth Seeger Aug. 21, 2020

Aug. 21, 2020

Hello all, I've suddenly started getting a slow but steady stream of fake sign ups. They fail because I'm getting a bounce back from the mail host saying that the email address they signed up with doesn't exist. I know this was asked a while back on this list, but I'm hoping there might be an update? Any way to add an am-I-human test to the sign up? Thanks, Seth

2 1

mailman not starting, status is active (exited)
by Ricardo Kleemann Aug. 19, 2020

Aug. 19, 2020

Hi, After quite a long time with no issues, I’ve started having a problem where mailman won’t start and I don’t see any clear error message I’m running on Ubuntu, not sure which mailman version (forgot how to determine). Here is the status info sudo systemctl status mailman ● mailman.service - LSB: Mailman Master Queue Runner Loaded: loaded (/etc/init.d/mailman; generated) Active: active (exited) since Wed 2020-08-19 07:38:59 PDT; 2h 46min ago Docs: man:systemd-sysv-generator(8) Process: 2351 ExecStop=/etc/init.d/mailman stop (code=exited, status=0/SUCCESS) Process: 2386 ExecStart=/etc/init.d/mailman start (code=exited, status=0/SUCCESS) Aug 19 07:38:59 relay1 systemd[1]: Starting LSB: Mailman Master Queue Runner... Aug 19 07:38:59 relay1 systemd[1]: Started LSB: Mailman Master Queue Runner Any ideas? thanks Ricardo

3 2

mailman stopped working, it shows active (exited)
by Ricardo Kleemann Aug. 19, 2020

Aug. 19, 2020

Hi, it’s been quite a while since I’ve been back to the list, mailman has been working very well for me But recently it has stopped working. I’m not exactly sure what I did to cause this. I’m not seeing any clear error message. Running on Ubuntu linux, I don’t quite remember how to determine my mailman version. Here’s the status info sudo systemctl status mailman.service ● mailman.service - LSB: Mailman Master Queue Runner Loaded: loaded (/etc/init.d/mailman; generated) Active: active (exited) since Wed 2020-08-19 07:38:59 PDT; 13min ago Docs: man:systemd-sysv-generator(8) Process: 2351 ExecStop=/etc/init.d/mailman stop (code=exited, status=0/SUCCESS) Process: 2386 ExecStart=/etc/init.d/mailman start (code=exited, status=0/SUCCESS) Aug 19 07:38:59 relay1 systemd[1]: Starting LSB: Mailman Master Queue Runner... Aug 19 07:38:59 relay1 systemd[1]: Started LSB: Mailman Master Queue Runner.

1 0

Invalid confirm text
by w.schoener＠alp.dillingen.de Aug. 19, 2020

Aug. 19, 2020

Hi there, I am new to mailman 3, python and django. I try to configure a mailman 3 list. To establish german text, I used the web-admin interface of mm3 in the "templates"-section. I inserted a text for "The message sent to subscribers when a subscription confirmation is required" Now, when I try to subscribe to the list, I get my first message in german language, with the confirm request: return the message unchange. When I return the message, I get an answer: Invalid confirm text. My request is pending. And there is no way to solve this pending request, in the webinterface, no subscription request is shown, no member is shown and no no-member is shown. Have you any hint, what is going wrong. What do I have to respect to create a message, where the confirmation is working. Thank you Wolfgang

2 5

Single-Sign-out for List member
by w.schoener＠alp.dillingen.de Aug. 17, 2020

Aug. 17, 2020

Hello, I have to configure mailman 3 for a german company. The privacy policy in our country demands for mailing-lists, that its member can sign out in one step, it is called sigle-sign-out. So I would like to ad a link in the footer of every message, with which every receiver/member can sign out of the newsletter with one click. It does not seam to be possible, to put this into effect with mailman 3. Does anybody have any hints, how to create a link, and when this link is called, the user is signed out of the newsletter. Thank you, Wolfgang

5 7

postfix docker image
by Danil Smirnov Aug. 16, 2020

Aug. 16, 2020

Hi, For those who are using Abhilash's Docker images for Mailman 3 deployment and willing to up Postfix as a container - I've created a lightweight Docker image for this purpose: https://github.com/danil-smirnov/docker-postfix It has been tested for awhile already. I'd appreciate more testing and bug reports/feature requests. Best regards, Danil Smirnov https://mailman3.com/

1 0

base64 re-encoding and line endings
by David Bremner Aug. 15, 2020

Aug. 15, 2020

I (along with some other admins) run a mailman3 (3.2.1, on debian stable) mailing list for notmuch (https://notmuchmail.org) It's our main method of reviewing, so we get lots of mail from git-send-email. Occasionaly people send it with Content-Transfer-Encoding 8bit. As far as I can tell what happens then is mailman3 re-encodes it as base64, taking the line endings as CRLF. git-am is unable to apply the patches that have been re-encoded. This seems somewhat related to [1]. Like one commentator there, I would be happy to be able to turn off the re-encoding, although I have the feeling from playing with the python email libraries that this might not be that easy. I'm writing in hope that someone can suggest another workaround, perhaps some kind line-ending rewriting before base64 encoding. I guess with 8bit transfer encoding there probably isn't a clear distinction between the line-endings on the wire, and the intended line-endings for delivery, but it could be inferred from the "X-Mailer: git-send-email" header. As a test, I sent the same patch through our mailman instance with Content-Transfer-Encoding base64 and that applies fine, since the original \n line endings are inside the base64 container. It's a known mis-feature of git-am that it can handle either CRLF line endings or base64 encoding, but not the combination of both. I have a local workaround involving re-formatting the patches, but I'd really like anyone to be able to apply the patches from the list archive. [1]: https://gitlab.com/mailman/mailman/-/issues/269

2 1

Announce Only List
by joseverde＠gmail.com Aug. 14, 2020

Aug. 14, 2020

So if we want to make a list announce only (e.g. only specific folks) can post, I've found I can set the list settings to automatically discard messages from members and non-members. Then I go into the individual permissions on each user to be allowed to post without moderation. This works fine, however it seems cumbersome. My expected solution was to make the announce only members moderators - however it appears being a moderator does not give any special ability to post to the list (nor does it appear to make you a 'member' from the point of mailman when sending messages to the list, since a moderator who is not a subscriber gets treated like a nonmember from the posting permissions perspective). Is this correct?

7 9

Missing mailman archives?
by Marco Marinello Aug. 12, 2020

Aug. 12, 2020

I've recently migrated from Mailman 2 to Mailman 3 but I'm setting up Hyperkitty just now. I imported the old mbox and that worked fine but now I'm missing the mails in the time between Mailman 3 started working and now: mailman config reports [paths.custom] var_dir: /opt/mailman/var But root@mm:/opt/mailman/var# find . . [OMISS] ./archives Where are the e-mails? Can I import them into Hyperkitty? Thanks, Marco

2 6

Hold messages that have binary attachments
by Quanah Gibson-Mount Aug. 12, 2020

Aug. 12, 2020

Is there a way to configure a list automatically put a hold on messages that have binary attachments such as jpgs, pngs, etc? Thanks, Quanah -- Quanah Gibson-Mount Product Architect Symas Corporation Packaged, certified, and supported LDAP solutions powered by OpenLDAP: <http://www.symas.com>

2 2

How to Unshunt Specific Message ?
by Shashikanth Komandoor Aug. 12, 2020

Aug. 12, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 in production environment from the past 3 months almost. I learnt how to unshunt the messages that got unshunted in mailman 3. But the command *mailman unshunt* would unshunt all the messages in the shunt queue. I want only a specific message to be unshunted and resent. I don't find my requirement reached with the help of *mailman unshunt*. Please suggest. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 3

Removing users account
by Massimo Zappalà Aug. 11, 2020

Aug. 11, 2020

Hi everybody, is there a method that allows the list administrator to delete a user account? I run this version: Mailman Core Version 3.2.1 Mailman Core API Version 3.0 Mailman Core Python Version 3.7.3 Postorius 1.2.4 HyperKitty version 1.2.2 Thanks Max

2 2

How to create user accounts and mail addresses through CURL instead of Site Administration ?
by Shashikanth Komandoor Aug. 11, 2020

Aug. 11, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 in production environment from the past 3 months almost. I am currently automating a few things using the CURL commands but only postorius related as of now. Now I have a requirement. I need to create a lot many users and their mapping email ids through Site Administration almost daily. But it is becoming to do the same through Graphical Interface. So, I just want to know the CURL commands that can be used to create the user accounts and email ids mapped to user accounts. Please do the needful. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 2

Better documentation for Mailman Core's config options
by Abhilash Raj Aug. 7, 2020

Aug. 7, 2020

Hey All, For the past few days, I've been trying to improve the documentation style for Mailman Core's config options. Internally, Mailman has all configurations defined in an ini formatted `schema.cfg` file, which serves as a schema for our `zope.configuration` library. We had that file simply embedded in the sphinx documentation previously as a wall of text. I ended up writing a Sphinx (our documentation generator) plugin which parses the config file and presents the same documentation with more bells and whistles so it is easier to lookup and link sections and config options.[1] The process of doing that was fun and I learnt how to write a simple sphinx plugin, so yay! It treats the comments above each config option in the ini file as it's doc and basically generates ReST text that it passes to Sphinx to parse and convert to the markup format that you see in browser. You can look at it in the source repo[2] . Do note that not all sections are documented yet, I am still figuring out what would be a good way to document template sections like `[plugins.master]` and other similar sections of that kind. [1]: https://gnu-mailman--667.org.readthedocs.build/projects/mailman/en/667/src/… ((URL is for the PR, the main doc seems like is serving the cached version from an older build). [2]: https://gitlab.com/mailman/mailman/-/blob/master/_ext/configplugin.py -- thanks, Abhilash Raj (maxking)

2 1

How to turn off Emergency Moderation for imported MM2 lists?
by Brian Carpenter Aug. 7, 2020

Aug. 7, 2020

I recently imported a number of MM2 lists into MM3. Unfortunately, the person had emergency moderation turned on for these lists. Since EM is not exposed to Postorius what can be done to reverse this? Thanks, Brian

3 6

Installation Help on Ubuntu 18
by joseverde＠gmail.com Aug. 3, 2020

Aug. 3, 2020

Hi folks, I spent many hours last night trying to get Mailman 3 up and running. I am using Ubuntu on a Digital Ocean LAMP droplet (so PHP, Apache, Sql, and Postfix are already installed). The LAMP stack works as I have a successful installation of YOURLS going on. So, I tried to use this guide (https://docs.google.com/document/d/1xIcSsoNFp2nHi7r4eQys00s9a0k2sHhu1V5Plan…) to install the Mailman3 package and got to the configuration screen (the one with all the DOS-esque GUI). I ran it but it kept saying the DB wasn't installed. Was I supposed to create SQL databases and users before running that and use those usernames/databases in the credentials it asks for? It doesn't seem like that in the way it asks the questions (since it asks to create a password) but I wasn't sure. Anywho, I tried to remove the package completely and restart but I keep spinning my wheels. So my questions: 1. Does that guide actually work? Did I just foul up the database part? 2. Is there a better way to install mailman3 with some nice step-by-step directions to follow? 3. Is there a way to completely wipe my previous installs without wiping the server? ( I didn't back up...silly I know ). I used apt-get --purge remove to uninstall mailman3 and mailman to start over, did that do the trick? Sorry for all the questions.

4 6

Custom Templates and reject_message() error
by Marcel Pietschmann Aug. 2, 2020

Aug. 2, 2020

Hi everyone, I'm running Mailman 3 in maxking's Docker container (tag 0.3). Mailman3 runs really well, thanks for that good job! But I noticed two errors. 1) When a new list is created, Mailman will not notify the list owners of their new mailing list. I tested it with the default template "domain:admin:notice:new-list.txt" and my own template (which i copied in $var_dir/templates/domains/DOMAIN/de/ Any customs templates in $var_dir/templates... aren't sent out, always the default templates from /usr/lib/python3/site-packages/mailman/templates/de. I can't find anything in the logs for that issue. 2) When a post requires an approval and I reject it with a notification a server error occurs: "An error occurred while processing your request." The Traceback in mailmanweb.log is: ERROR 2020-08-01 16:19:19,926 17 django.request Internal Server Error: /postorius/lists/list.domain.de/held_messages/moderate Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/django/core/handlers/exception.py", line 34, in inner response = get_response(request) File "/usr/lib/python3.6/site-packages/django/core/handlers/base.py", line 115, in _get_response response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3.6/site-packages/django/core/handlers/base.py", line 113, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python3.6/site-packages/django/views/decorators/http.py", line 40, in inner return func(request, *args, **kwargs) File "/usr/lib/python3.6/site-packages/django/contrib/auth/decorators.py", line 21, in _wrapped_view return view_func(request, *args, **kwargs) File "/usr/lib/python3.6/site-packages/postorius/auth/decorators.py", line 60, in wrapper return fn(*args, **kwargs) File "/usr/lib/python3.6/site-packages/postorius/views/list.py", line 549, in moderate_held_message mailing_list.reject_message(msg.request_id, reason=reason) TypeError: reject_message() got an unexpected keyword argument 'reason' Thanks a lot for any suggestion. Greets Marcel Mailman Core Version: 3.3.1 Mailman Core API Version: 3.1 Postorius Version 1.3.3 HyperKitty Version 1.3.3

2 1

Mailman 3.2.0 Hyperkitty fulltext index error
by Marvin Gülker July 31, 2020

July 31, 2020

Hi, I've just upgraded to Mailman 3.2.0 (finally everything Python 3 now, thanks!) and it appears to work. However, there's a repeating error message in mailman-suite's logfile for Hyperkitty that looks like this: ERROR 2018-07-12 14:28:33,895 2742 hyperkitty.lib.utils Failed to update the fulltext index: ord() expected a character, but string of length 0 found Traceback (most recent call last): File "/home/mailman/env3/lib/python3.5/site-packages/hyperkitty/lib/utils.py", line 179, in run_with_lock fn(*args, **kwargs) File "/home/mailman/env3/lib/python3.5/site-packages/hyperkitty/search_indexes.py", line 115, in update_index update_cmd.update_backend("hyperkitty", "default") File "/home/mailman/env3/lib/python3.5/site-packages/haystack/management/commands/update_index.py", line 276, in update_backend last_max_pk=max_pk) File "/home/mailman/env3/lib/python3.5/site-packages/haystack/management/commands/update_index.py", line 97, in do_update backend.update(index, current_qs, commit=commit) File "/home/mailman/env3/lib/python3.5/site-packages/haystack/backends/whoosh_backend.py", line 178, in update self.setup() File "/home/mailman/env3/lib/python3.5/site-packages/haystack/backends/whoosh_backend.py", line 126, in setup self.index = self.storage.open_index(schema=self.schema) File "/home/mailman/env3/lib/python3.5/site-packages/whoosh/filedb/filestore.py", line 176, in open_index return indexclass(self, schema=schema, indexname=indexname) File "/home/mailman/env3/lib/python3.5/site-packages/whoosh/index.py", line 421, in __init__ TOC.read(self.storage, self.indexname, schema=self._schema) File "/home/mailman/env3/lib/python3.5/site-packages/whoosh/index.py", line 632, in read check_size("int", _INT_SIZE) File "/home/mailman/env3/lib/python3.5/site-packages/whoosh/index.py", line 626, in check_size sz = stream.read_varint() File "/home/mailman/env3/lib/python3.5/site-packages/whoosh/filedb/structfile.py", line 191, in read_varint return read_varint(self.read) File "/home/mailman/env3/lib/python3.5/site-packages/whoosh/util/varints.py", line 102, in read_varint b = ord(readfn(1)) TypeError: ord() expected a character, but string of length 0 found The error repeats every minute, so I suppose it comes from the minutely cronjob. This cronjob looks like this: * * * * * mailman bash -c 'cd /home/mailman && . /home/mailman/env3/bin/activate && django-admin runjobs minutely --pythonpath /home/mailman/mailman-suite/mailman-suite_project --settings settings' What's wrong here? Marvin -- Blog: https://mg.guelker.eu PGP/GPG ID: F1D8799FBCC8BC4F

3 3

Owner's or Moderator's Lists
by Johnny Cison July 31, 2020

July 31, 2020

I feel like I'm missing something obvious, but is there a page in Postorius that lists all of the lists of which the user is the owner or moderator? When I visit the /lists/ URL as an admin, I see a full list. When I visit the /lists/ URL without being logged in, I see public lists. I've heard from two people who are list owners (and confirmed they're logged in and their email is showing as verified) that they also just see the public lists on the /lists/ page. (I tried searching the archives and didn't see anything that addressed this. My apologies if I overlooked it!)

2 3

Good choice of defaults for content filtering?
by hansen＠rc.org July 31, 2020

July 31, 2020

Hi all, I had MM2 set to the default filtering that I think came OOTB. MM3 has none such and I was wondering: a. What were those MM2 defaults (My MM2 server is long gone now). b. Is there a better set today. I know that MIME types can be faked, but they have worked. I want to avoid anything that can contain malicious code while also allowing simple text to go through. Yours, Allan

3 2

A little stuck with installation of MM3 - ModuleNotFoundError: No module named 'flufl.lock'
by Odhiambo Washington July 30, 2020

July 30, 2020

I decided to try this again, on FreeBSD-12.1 I still decided to follow https://wiki.list.org/DOC/Mailman%203%20installation%20experience which I know is not the main documentation, but I find the process easier to follow. I am also taking notes to see if I could share if I manage to succeed. This is important for me because Python-2.7 is being removed from FreeBSD in Dec 2020. I need to bail out of mailman-2.x before that happens so I am trying my hand again om MM3. I have failed before :-) I am stuck at this step: (venv) [root@gw /opt/mailman/mm]# /opt/mailman/mm/bin/mailman-post-update + '[' False == False ']' + mkdir -p /opt/mailman/mm/static + /opt/mailman/mm/bin/django-admin collectstatic --clear --noinput --verbosity 0 Traceback (most recent call last): File "/opt/mailman/mm/venv/bin/django-admin", line 33, in <module> sys.exit(load_entry_point('Django==3.0.8', 'console_scripts', 'django-admin')()) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/core/management/__init__.py", line 401, in execute_from_command_line utility.execute() File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/core/management/__init__.py", line 377, in execute django.setup() File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/__init__.py", line 24, in setup apps.populate(settings.INSTALLED_APPS) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/apps/registry.py", line 114, in populate app_config.import_models() File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/apps/config.py", line 211, in import_models self.models_module = import_module(models_module_name) File "/usr/local/lib/python3.7/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1006, in _gcd_import File "<frozen importlib._bootstrap>", line 983, in _find_and_load File "<frozen importlib._bootstrap>", line 967, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 677, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/opt/mailman/mm/venv/lib/python3.7/site-packages/HyperKitty-1.3.4-py3.7.egg/hyperkitty/models/__init__.py", line 26, in <module> from .email import Attachment, Email File "/opt/mailman/mm/venv/lib/python3.7/site-packages/HyperKitty-1.3.4-py3.7.egg/hyperkitty/models/email.py", line 35, in <module> from .mailinglist import MailingList File "/opt/mailman/mm/venv/lib/python3.7/site-packages/HyperKitty-1.3.4-py3.7.egg/hyperkitty/models/mailinglist.py", line 37, in <module> from hyperkitty.lib.utils import pgsql_disable_indexscan File "/opt/mailman/mm/venv/lib/python3.7/site-packages/HyperKitty-1.3.4-py3.7.egg/hyperkitty/lib/utils.py", line 42, in <module> from flufl.lock import Lock *ModuleNotFoundError: No module named 'flufl.lock'* (venv) [root@gw /opt/mailman/mm]# pip install flufl.lock Requirement already satisfied: flufl.lock in ./venv/lib/python3.7/site-packages/flufl.lock-4.0-py3.7.egg (4.0) Requirement already satisfied: atpublic in ./venv/lib/python3.7/site-packages/atpublic-1.0-py3.7.egg (from flufl.lock) (1.0) Requirement already satisfied: psutil in ./venv/lib/python3.7/site-packages/psutil-5.7.2-py3.7-freebsd-12.1-RELEASE-p7-amd64.egg (from flufl.lock) (5.7.2) Even after the 'pip install flufl.lock' it still doesn't find it! I have had a similar problem earlier with installing pylibmc. It could not find libmemcache.h despite it being inside /usr/local/include somewhere and I luckily solved that with export LIBMEMCACHED=/usr/local && pip install pylibmc. I am wondering if there is an equivalent to resolve this one with flufl.lock. Thanks in advance. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", grep ^[^#] :-)

3 21

500 Internal Server Error on specific list pages
by Johnny Cison July 30, 2020

July 30, 2020

I have a new Mailman 3 server set up and am having a strange issue with just one particular list. Accessing the list's Info page URL or it's Archiving Settings page URL returns a 500 Internal Server Error, but its other pages work correctly. Also, the Info and Archiving pages on the other lists are working correctly. When I access the info page for the problem list, I get these errors in the log: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/django/core/handlers/exception.py", line 41, in inner response = get_response(request) File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 249, in _legacy_get_response response = self._get_response(request) File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 187, in _get_response response = self.process_exception_by_middleware(e, request) File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 185, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.7/dist-packages/django/views/generic/base.py", line 68, in view return self.dispatch(request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/postorius/views/generic.py", line 59, in dispatch return super(MailingListView, self).dispatch(request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/django/views/generic/base.py", line 88, in dispatch return handler(request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/postorius/views/list.py", line 216, in get 'hyperkitty' in self.mailing_list.archivers and File "/usr/lib/python2.7/_abcoll.py", line 388, in __contains__ self[key] File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/base.py", line 151, in __getitem__ return self._get(key) File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/base.py", line 90, in _get return self.rest_data[key] File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/base.py", line 76, in rest_data response, content = self._connection.call(self._url) File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/connection.py", line 103, in call raise HTTPError(url, response.status, content, response, None) HTTPError: HTTP Error 500: A server error occurred. Please contact the administrator. When I access the Archiving page in Settings, I get these: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/django/core/handlers/exception.py", line 41, in inner response = get_response(request) File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 249, in _legacy_get_response response = self._get_response(request) File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 187, in _get_response response = self.process_exception_by_middleware(e, request) File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 185, in _get_response response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.7/dist-packages/django/contrib/auth/decorators.py", line 23, in _wrapped_view return view_func(request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/postorius/auth/decorators.py", line 39, in wrapper return fn(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/postorius/views/list.py", line 719, in list_settings form = form_class(initial=initial_data, mlist=m_list) File "/usr/lib/python2.7/dist-packages/postorius/forms.py", line 303, in __init__ [(key, key) for key in sorted(self._mlist.archivers.keys())]) File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/base.py", line 172, in keys return list(self) File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/base.py", line 166, in __len__ return len(self.rest_data) File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/base.py", line 76, in rest_data response, content = self._connection.call(self._url) File "/usr/lib/python2.7/dist-packages/mailmanclient/restbase/connection.py", line 103, in call raise HTTPError(url, response.status, content, response, None) HTTPError: HTTP Error 500: A server error occurred. Please contact the administrator. Not a python developer, which makes debugging based on the above more difficult. I've seen some other errors posted to this list that highlight specific setting or config issues, but I'm not seeing that in these. Any ideas?

2 5

The email confirming the registration of an account on postorius is not correctly translated in Italian
by Massimo Zappalà July 30, 2020

July 30, 2020

Hi everyone, thanks to the files.po on Weblate, I have translated all Mailman-Core, Postorius, Hyperkitty and Django_mailman3. I have also translated the confirmation message to subscribe to a list. Everything works, except for this: When I register a new account on postorius, he sends me a confirmation email totally in English, except the following final block which is sent in Italian: in my /usr/lib/python3/dist-packages/allauth/locale/it/LC_MESSAGES/django.po #: templates/account/email/email_confirmation_message.txt:7 #, python-format msgid "" "Thank you from %(site_name)s!\n" "%(site_domain)s" msgstr "" "Grazie da %(site_name)s!\n" "%(site_domain)s" By carefully analyzing the same file .po, I notice that the Italian translation of the whole text already exists. Why does the confirmation email arrive in English? #: templates/account/email/email_confirmation_message.txt:1 #, fuzzy, python-format #| msgid "" #| "User %(user_display)s at %(site_name)s has given this as an email " #| "address.\n" #| "\n" #| "To confirm this is correct, go to %(activate_url)s\n" msgid "" "Hello from %(site_name)s!\n" "\n" "You're receiving this e-mail because user %(user_display)s has given yours " "as an e-mail address to connect their account.\n" "\n" "To confirm this is correct, go to %(activate_url)s\n" msgstr "" "Ciao da %(site_name)s!\n" "\n" "L'Utente %(user_display)s di %(site_name)s ha registrato questo indirizzo e-" "mail.\n" "Per confermare, clicca qui %(activate_url)s\n" Thanks Max

2 2

Change language to welcome message in mailman3
by Massimo Zappalà July 30, 2020

July 30, 2020

Hi everyone, My Version installed on Debian buster: mailman3: 3.2.1 postorius: 1.2.4 hyperkitty: 1.2.2 All interfaces work well in Italian language, but "Welcome message" is in English. I'm trying to change the language to the "Welcome message" with mailman shell, but it doesn't work sudo mailman shell -l test(a)pratico.work >>>m.preferred_language='it' >>>commit() >>>CTRL-D This is my file /etc/mailman3/mailman-web.py LANGUAGE_CODE = 'it-IT' TIME_ZONE = 'Europe/Rome' USE_I18N = False USE_L10N = True USE_TZ = True Would anyone know how to do it? Thank you Max

2 10

Anyone integrated Single Sign On like Azure SSO with Mailman3?
by Jacob Bargery July 29, 2020

July 29, 2020

We are looking at whether it is possible to integrate Azure Single Sign On with Mailman3 to streamline use for our users, has anyone had any luck with doing this? If so, how did you go about doing so? Thanks

3 2

mailman2 import not working
by Abhijith PA July 29, 2020

July 29, 2020

Hello. Recently I migrated a mailman2 mailing list to mailmam3. There was one problem[1] I faced. Currently I am running Debian packaged version (3.2.2-1) which don't have this fix. But it was manually done with this[2] method. Basically this is what I did for migration: ------------------------------------------- mailman create -o <foo(a)example.com> foo-bar(a)lists.example.com mailman import 21 foo-bar(a)lists.example.com path/to/config.pck ------------------------------------------- Then imported archives with ------------------------------------------ python3 manage.py hyperkitty_import --pythonpath /usr/share/mailman3-web --settings settings -l foo-list(a)list.example.com <path to>/foo-list.mbox python3 manage.py update_index_one_list foo-list(a)example.com --pythonpath /usr/share/mailman3-web --settings settings ------------------------------------------ After everything done tried a test mail, but didn't reach any of the inbox though mail is archived. mailman.log says message is accepted ACCEPT: <FEE2E515-C054-41E6-9853-744D3312A137(a)xxxxxx.org> Nothing after this. On smtp.log we have Jul 29 16:11:52 2020 (16161) Peer: ('127.0.0.1', 54792) Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) handling connection Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) Data: b'LHLO lists.xxxxxxx.in' Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) Data: b'MAIL FROM:<abhijith(a)xxxxxxxxx.org>' Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) sender: abhijith(a)xxxxxxx.org Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) Data: b'RCPT TO:<temptest(a)lists.xxxxxxxxxx.in>' Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) recip: temptest(a)lists.xxxxxxxxxx.in Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) Data: b'DATA' Jul 29 16:11:52 2020 (16161) ('127.0.0.1', 54792) Data: b'QUIT' Please help. Abhijith [1] https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… [2] - https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message…

2 3

Could not locate column in row for column 'user.id'
by Shashikanth Komandoor July 28, 2020

July 28, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 in production environment from the past 2 months almost. From the past few days, I found my server is responding to the users very slowly and throwing the Server Error page (of course getting the required page after multiple refreshes) for almost every click on the postorius pages (not yet observed on hyperkitty front end which in fact is not so important for me as of now). During that time, I observed in the mailman.log an error message saying "Could not locate column in row for column 'user.id'". The complete traceback log is attached with the mail. The error message is generated for almost all the lists and all the clicks. And despite this error message, I don't know how the required page is loaded after a few refreshes of the webpage. I don't know how to resolve this issue. Please advise. Also, please let me know if anything I need to share with you. -- Thanks & Regards, Shashi Kanth.K 9052671936

2 5

Creating superuser - problem with documentation or it's just me?
by Odhiambo Washington July 28, 2020

July 28, 2020

Hi, In my quest to create a superuser, I followed another HOWTO - https://docs.mailman3.org/en/latest/devsetup.html (venv) [root@gw /opt/mailman/git/mailman-suite/mailman-suite_project]# python manage.py migrate Traceback (most recent call last): File "manage.py", line 10, in <module> execute_from_command_line(sys.argv) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/core/management/__init__.py", line 401, in execute_from_command_line utility.execute() File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/core/management/__init__.py", line 377, in execute django.setup() File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/__init__.py", line 24, in setup apps.populate(settings.INSTALLED_APPS) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/apps/registry.py", line 114, in populate app_config.import_models() File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/apps/config.py", line 211, in import_models self.models_module = import_module(models_module_name) File "/usr/local/lib/python3.7/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1006, in _gcd_import File "<frozen importlib._bootstrap>", line 983, in _find_and_load File "<frozen importlib._bootstrap>", line 967, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 677, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/opt/mailman/git/hyperkitty/hyperkitty/models/__init__.py", line 25, in <module> from .category import ThreadCategory File "/opt/mailman/git/hyperkitty/hyperkitty/models/category.py", line 61, in <module> class ThreadCategory(models.Model): File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/db/models/base.py", line 121, in __new__ new_class.add_to_class('_meta', Options(meta, app_label)) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/db/models/base.py", line 325, in add_to_class value.contribute_to_class(cls, name) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/db/models/options.py", line 208, in contribute_to_class self.db_table = truncate_name(self.db_table, connection.ops.max_name_length()) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/db/__init__.py", line 28, in __getattr__ return getattr(connections[DEFAULT_DB_ALIAS], item) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/db/utils.py", line 207, in __getitem__ backend = load_backend(db['ENGINE']) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/db/utils.py", line 111, in load_backend return import_module('%s.base' % backend_name) File "/usr/local/lib/python3.7/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "/opt/mailman/mm/venv/lib/python3.7/site-packages/Django-3.0.8-py3.7.egg/django/db/backends/sqlite3/base.py", line 14, in <module> from sqlite3 import dbapi2 as Database File "/usr/local/lib/python3.7/sqlite3/__init__.py", line 23, in <module> from sqlite3.dbapi2 import * File "/usr/local/lib/python3.7/sqlite3/dbapi2.py", line 27, in <module> from _sqlite3 import * ModuleNotFoundError: No module named '_sqlite3' *<==============================================================* (venv) [root@gw /opt/mailman/git/mailman-suite/mailman-suite_project]# pip install pysqlite3 Collecting pysqlite3 Using cached pysqlite3-0.4.3.tar.gz (40 kB) Building wheels for collected packages: pysqlite3 Building wheel for pysqlite3 (setup.py) ... done WARNING: Legacy build of wheel for 'pysqlite3' created no files. Command arguments: /opt/mailman/mm/venv/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ge24cqof/pysqlite3/setup.py'"'"'; __file__='"'"'/tmp/pip-install-ge24cqof/pysqlite3/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-ou7p1uhx Command output: [use --verbose to show] Running setup.py clean for pysqlite3 Failed to build pysqlite3 Installing collected packages: pysqlite3 Running setup.py install for pysqlite3 ... done Successfully installed pysqlite3 <============================================================== But even after that, the error about *'ModuleNotFoundError: No module named '_sqlite3'* still persists.. How does one solve this issue?? So I figured out that I need to put my own settings_local.py into the directory and let the command rely on MySQL as the database backend since by default, it uses sqlite3 backend. But the question then is WHY is this not documented on the above page??? How can I delete the superuser after creating it?? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", grep ^[^#] :-)

2 5

# comment allowed in a template file?
by skenny＠scss.tcd.ie July 28, 2020

July 28, 2020

I've found that dropping files in to the templates directory is a simple and convenient way to make certain things happen. E.g. I can set a default footer for all posts by putting the desired content in a file called var/templates/site/en/list:member:generic:footer.txt. I'm running Mailman 3 in maxking's Docker container. I'm also using Puppet to do as much configuration as possible, so I'd like to add a comment to the file that reads something like: # This file is managed by Puppet. Is it ok to do this? I may not have searched the docs enough, but I couldn't find anything relating to comments. One other observation in case it's any use: Initially, I created the template files with owner set to "root". This resulted in postings to lists getting stuck in mailman-core. It's vital that these files are owned by user "mailman". Once I changed the owner of the file to the latter, everything worked. Stephen

3 4

MM3 not starting afte an upgrade
by Gelpi Andrea July 28, 2020

July 28, 2020

Hi, to day in a Debian system I upgraded some packages. After the MM3 doesn't start anymore. These are the packages I upgraded: [UPGRADE] clamav:amd64 0.102.3+dfsg-1 -> 0.102.4+dfsg-1 [UPGRADE] clamav-base:amd64 0.102.3+dfsg-1 -> 0.102.4+dfsg-1 [UPGRADE] clamav-daemon:amd64 0.102.3+dfsg-1 -> 0.102.4+dfsg-1 [UPGRADE] clamav-freshclam:amd64 0.102.3+dfsg-1 -> 0.102.4+dfsg-1 [UPGRADE] clamdscan:amd64 0.102.3+dfsg-1 -> 0.102.4+dfsg-1 [UPGRADE] gcc-10-base:amd64 10.1.0-4 -> 10.1.0-6 [UPGRADE] libc-l10n:amd64 2.30-8 -> 2.31-1 [UPGRADE] libclamav9:amd64 0.102.3+dfsg-1 -> 0.102.4+dfsg-1 [UPGRADE] libgcc-s1:amd64 10.1.0-4 -> 10.1.0-6 [UPGRADE] libnss3:amd64 2:3.42.1-1+deb10u2 -> 2:3.42.1-1+deb10u3 [UPGRADE] python3-django-hyperkitty:amd64 1.3.2-1 -> 1.3.2-1.1 [UPGRADE] python3-django-postorius:amd64 1.3.2-2 -> 1.3.2-2.1 [UPGRADE] qemu-guest-agent:amd64 1:3.1+dfsg-8+deb10u5 -> 1:3.1+dfsg-8+deb10u6 MM3 on start up says: Jul 23 13:29:39 posta mailman3[2608]: Traceback (most recent call last): Jul 23 13:29:39 posta mailman3[2608]: File "/usr/bin/mailman", line 11, in <module> Jul 23 13:29:39 posta mailman3[2608]: load_entry_point('mailman==3.2.1', 'console_scripts', 'mailman')() Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/click/core.py", line 764, in __call__ Jul 23 13:29:39 posta mailman3[2608]: return self.main(*args, **kwargs) Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/click/core.py", line 717, in main Jul 23 13:29:39 posta mailman3[2608]: rv = self.invoke(ctx) Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/mailman/bin/mailman.py", line 69, in invoke Jul 23 13:29:39 posta mailman3[2608]: return super().invoke(ctx) Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/click/core.py", line 1137, in invoke Jul 23 13:29:39 posta mailman3[2608]: return _process_result(sub_ctx.command.invoke(sub_ctx)) Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/click/core.py", line 956, in invoke Jul 23 13:29:39 posta mailman3[2608]: return ctx.invoke(self.callback, **ctx.params) Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/click/core.py", line 555, in invoke Jul 23 13:29:39 posta mailman3[2608]: return callback(*args, **kwargs) Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/click/decorators.py", line 17, in new_func Jul 23 13:29:39 posta mailman3[2608]: return f(get_current_context(), *args, **kwargs) Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/mailman/commands/cli_control.py", line 81, in start Jul 23 13:29:39 posta mailman3[2608]: status, lock = master_state() Jul 23 13:29:39 posta mailman3[2608]: File "/usr/lib/python3/dist-packages/mailman/bin/master.py", line 104, in master_state Jul 23 13:29:39 posta mailman3[2608]: os.kill(pid, 0) Jul 23 13:29:39 posta mailman3[2608]: PermissionError: [Errno 1] Operation not permitted There is a permission error, but on what? Thanks for any help. Regards -- Gelpi ing. Andrea -------------------------------------------------------------- It took the computing power of three C-64s to fly to the Moon. It takes a 486 to run Windows 95. Something is wrong here. --------------------------------------------------------------

3 7

sqlalchemy.orm.exc.MultipleResultsFound: Multiple rows were found for one_or_none()
by Shashikanth Komandoor July 28, 2020

July 28, 2020

Hi Team, Today, I found an error message like "Multiple rows were found for one_or_none()" when a hold message is approved for a list. Until yesterday the mails were accepted and delivered fine. But today the above said error message is thrown. Apart from that, I saw the mail had gone into the shunt queue. The "mailman qfile" output of the shunt message and the respective traceback log from mailman.log are attached. You may please go through them and help me out. Please also let me know if I have to share any more details. -- Thanks & Regards, Shashi Kanth.K 9052671936

2 5

Running Mailman3 under supervisord
by Odhiambo Washington July 27, 2020

July 27, 2020

Hello world, Is it possible to run MM3 under supervisord? What would I use for command= ?? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", grep ^[^#] :-)

3 4

mailman3 nightly script(s) are leaking memory + mitigation
by Mark Dadgar July 24, 2020

July 24, 2020

So as I mentioned in another thread, I have a shiny new install of mailman3 latest using venv (thanks, Brian!). It’s running on ubuntu 20.04 using python 3.8.2, django 2.2.12, nginx, postgres, and memcached. The only functions this server runs are 1) postfix and dovecot for a small number of personal email accounts, and 2) mailman3 for a couple of mailing lists (one of which is fairly high traffic). Not long after install, I saw a couple of instances of the OOM killer activating in the logs. I set up a 1GB swapfile (discouraged on Digital Ocean instances because they don’t like their flash drives to take that kind of pounding) as a safety net. Then I saw the free swap space eroding over time, so I started collecting some data. Initial evening stats: top - 23:29:16 up 15 days, 9:20, 1 user, load average: 0.07, 0.16, 0.17 Tasks: 200 total, 1 running, 199 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.0 us, 1.7 sy, 0.0 ni, 96.3 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st MiB Mem : 3936.2 total, 264.9 free, 1651.4 used, 2019.9 buff/cache MiB Swap: 1000.0 total, 811.2 free, 188.8 used. 1854.5 avail Mem Stats the next morning: top - 08:42:15 up 13 days, 18:33, 1 user, load average: 0.29, 0.27, 0.19 Tasks: 204 total, 1 running, 203 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.5 us, 1.4 sy, 0.0 ni, 96.0 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st MiB Mem : 3936.2 total, 214.7 free, 2244.8 used, 1476.7 buff/cache MiB Swap: 1000.0 total, 500.3 free, 499.7 used. 1318.8 avail Mem Stats the next evening: top - 23:26:00 up 14 days, 9:17, 1 user, load average: 0.10, 0.06, 0.08 Tasks: 209 total, 1 running, 208 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.6 us, 1.7 sy, 0.0 ni, 95.2 id, 0.3 wa, 0.0 hi, 0.3 si, 0.1 st MiB Mem : 3936.2 total, 206.0 free, 2253.6 used, 1476.6 buff/cache MiB Swap: 1000.0 total, 485.9 free, 514.1 used. 1305.5 avail Mem Stats the following morning: top - 08:09:32 up 14 days, 18:01, 1 user, load average: 0.01, 0.07, 0.14 Tasks: 194 total, 1 running, 193 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.0 us, 1.4 sy, 0.0 ni, 96.6 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st MiB Mem : 3936.2 total, 270.6 free, 1974.5 used, 1691.2 buff/cache MiB Swap: 1000.0 total, 266.5 free, 733.5 used. 1545.1 avail Mem As you can see, something during the night is eating memory and not letting it go. If I restart gunicorn, I get the memory back: sudo systemctl restart gunicorn top - 08:52:29 up 14 days, 18:44, 1 user, load average: 0.71, 0.49, 0.25 Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 6.1 us, 3.0 sy, 0.0 ni, 90.9 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3936.2 total, 936.3 free, 1277.1 used, 1722.9 buff/cache MiB Swap: 1000.0 total, 804.8 free, 195.2 used. 2242.5 avail Mem I did a little googling and a mitigation that seems to mostly work is to have gunicorn retire its workers periodically to free up memory. gunicorn.cf: max_requests = 1000 max_requests_jitter = 50 That restarts a worker after 1000 requests and adds some jitter so they don’t all get restarted at the same time. I am still seeing the erosion of a couple of MB of swap each day, but it’s WAY better than losing 250MB-350MB overnight. FYI for others who may see this. - Mark ----- mark(a)pdc-racing.net | 408-348-2878

2 1

Re: Mailman REST API not available. Please start Mailman Core.
by Shashikanth Komandoor July 23, 2020

July 23, 2020

Thank you Mark for your response. I understood that gunicorn is a front end that is used like web server like nginx. But I don't think I am using it instead I am using the httpd to redirect requests to postorius. And I am starting the mailman-suite with the command "python manage.py runserver 0.0.0.0:8000 --insecure &". Hope this does not use gunicorn (which of course I don't know what it is until now). Please correct me if any point I am mentioning is wrong. So, in this case, do you think configuring gunicorn as below would work: *calling gunicorn.cfg in mailman.cfg as below * *[webservice]* *configuration: /var/lib/mailman/mailman/src/mailman/config/gunicorn.cfg* *and content of gunicorn.cfg as below* *(venv3) [root@lsmgr mailman]# cat /var/lib/mailman/mailman/src/mailman/config/gunicorn.cfg[gunicorn]# All the options that can be put here are available at# http://docs.gunicorn.org/en/stable/settings.html#settings <http://docs.gunicorn.org/en/stable/settings.html#settings># No of seconds to wait before killing the worker processes.* *workers = 4graceful_timeout = 90* Also what is the difference between timeout and graceful_timeout ? Please help me if I can increase the management better. Any guide is also helpful for me. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Thu, Jul 23, 2020 at 4:10 AM Mark Sapiro <mark(a)msapiro.net> wrote: > On 7/22/20 9:21 AM, Shashikanth Komandoor wrote: > > Hi Mark, > > > > Never mind please I am sending to you only instead of group as I am > > sending you the production content along with the mail. > > > See my other reply. > > > > I have configured the workers count as 4 and timeout as 900 in > > mailman.cfg under [webservice]. This is FYI. > > You can't configure Mailman's REST gunicorn workers directly in the > [webservice] section of mailman.cfg. The only thing you can configure > there is: > > configuration: /path/to/gunicorn.cfg > > That file, which is separate from your web server gunicorn.cfg, is where > you put things like > > [gunicorn] > timeout = 900 > > It also will not work to put a gunicorn section in mailman.cfg. It must > be in a separate file pointed to by webservice.configuration. > > Increasing the number of workers won't help this issue. > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > -- Thanks & Regards, Shashi Kanth.K 9052671936

3 2

Re: [ERROR] Error handling request List archivers
by Shashikanth Komandoor July 23, 2020

July 23, 2020

Thank you Mark for guiding me to the benefit of putting the list and so I have added the list. Along with the [archiver.hyperkitty], [mta] and [database], few lines of my mailman.cfg look like below: *[webservice]workers = 4timeout = 900* The above block of webservice is added yesterday for testing or trail as I am getting the above issue. And there is no line that is calling *gunicorn* in my mailman.cfg. Apart from that I tried to locate and see the content of the gunicorn.cfg file as below : *(venv3) [root@lsmgr mailman]# cat /var/lib/mailman/mailman/src/mailman/config/gunicorn.cfg[gunicorn]# All the options that can be put here are available at# http://docs.gunicorn.org/en/stable/settings.html#settings <http://docs.gunicorn.org/en/stable/settings.html#settings># No of seconds to wait before killing the worker processes.graceful_timeout = 30* Please confirm the time I have to change is *graceful_timeout *in *gunicorn.cfg* and if I have changed how do I restart the *gunicorn*. I have never used or never known about this *gunicorn* but still running the service in production. Please help me and also suggest if I could provide you any more data from giving resolution. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#m_5710631741815235215_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Thu, Jul 23, 2020 at 3:47 AM Mark Sapiro <mark(a)msapiro.net> wrote: > On 7/22/20 9:13 AM, Shashikanth Komandoor wrote: > > > Never mind please I am sending to you only instead of group as I am > sending you the production content along with the mail. > > I don't see anything there that can't be posted to the > mailman-users(a)mailman3.org list. If your concern is revealing the > support-tnvc.lsmgr.nic.in list id, just replace it with <list-id> or > list.example.com or similar. > > Messages sent to me personally rather than the list suffer many > problems. They are my absolute last priority, and I am only one person, > the collective knowledge of the list is greater. Also, at times I am off > line for several days or longer. > > Finally, there is no opportunity for other members of the community to > benefit from an off-list exchange. > > > When I am trying to browse one of my lists, I am getting "[ERROR] > > Error handling request /3.1/lists/support-tnvc.lsmgr.nic.in/archivers > > <http://support-tnvc.lsmgr.nic.in/archivers>" in the mailman.log and the > > full error message is in attachment. > > Try increasing your gunicorn worker timeout from the default 30 seconds. > I.e., add > > timeout = 90 > > to your gunicorn.cfg and restart gunicorn. > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 1

migration plan and auto responder
by Mohsen Masoudfar July 23, 2020

July 23, 2020

Hi, I am writing this in the hope to get some good advises for migration lists from Mailman2 to Mailman3. Thanks a lot in advance. Here is the requirements: * During the migration the old system shouldn't process the emails for the list under migration in the normal way. It should send an email, and only one to the member who sent the original email to the list saying the list is under migration. I know I could do this by auto responder, but the original email would be processed and sent to all members, which I want to block . * After migration the old system should send, per auto responder again, an email to the member who sent to the list, mentioning the new address (the domain is a new one, the list name the same), but again not sending the original email to the list members. * No hackers, robots, spammers should get the new list address. The lists are all hidden. Best regards Mohsen Masoudfar Lead System Analyst, IT Operation American Association for the Advancement of Science 1200 New York Ave, NW, Washington, DC 20005 202-326-7087

2 4

Python 3.5 support?
by Joel Lord July 22, 2020

July 22, 2020

I'm looking through the recent changes to Core and Postorius and I keep spotting what looks like removal of the test cases for Python 3.5. Is the next release going to be dropping support for 3.5? Is this because 3.5 is going EOL shortly or because there are changes in the upcoming release that actively will not work on 3.5? -- Joel Lord

2 1

Docker Support Sucks
by Brian Carpenter July 22, 2020

July 22, 2020

Ok, now that I got that out of the way. Maybe I can get some help here for a Docker Installation of Mailman 3. I updated a Maxking's Docker installation to Postorius 1.3.3. It made my client's list unusable to a continual stream of removals due to ghost bounce processes. So, I want to totally move away from the use of Docker (mainly because I have found it buggy and the support is simply lacking) and install Mailman 3 for this client from source. However I need to get an export of their list members. But of course, I can't. Rest API times out and I don't know how to apply the instructions I was given to fix it and I don't have days to way for one. So please help. I increased the gunicorn workers to 4, hoping that would allow me to do the CSV export. No. So was given these instructions: ### The issues seems to be due to timeout not due to high load. You want to increase the timeout for gunicorn and you can do that by specifying a gunicorn.ini config file: [webservice] configuration: /path/to/gunicorn.cfg and then in the gunicorn.cfg you can add [gunicorn] timeout = 90 graceful_timeout = 30 ### I applied the above changes to /opt/mailman/core/mailman-extra.cfg and created the gunicorn.cfg file. Restarted the docker container (mailman-core) and no access to Postorius due to no REST api. After restarting docker-mailman, I can't access Postorius due to the following error: ERROR 2020-07-20 20:16:27,351 15 postorius Mailman REST API not available Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/urllib3/connection.py", line 160, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/usr/lib/python3.6/site-packages/urllib3/util/connection.py", line 84, in create_connection raise err File "/usr/lib/python3.6/site-packages/urllib3/util/connection.py", line 74, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/urllib3/connectionpool.py", line 677, in urlopen chunked=chunked, File "/usr/lib/python3.6/site-packages/urllib3/connectionpool.py", line 392, in _make_request conn.request(method, url, **httplib_request_kw) File "/usr/lib/python3.6/http/client.py", line 1254, in request self._send_request(method, url, body, headers, encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1300, in _send_request self.endheaders(body, encode_chunked=encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1249, in endheaders self._send_output(message_body, encode_chunked=encode_chunked) File "/usr/lib/python3.6/http/client.py", line 1036, in _send_output self.send(msg) File "/usr/lib/python3.6/http/client.py", line 974, in send self.connect() File "/usr/lib/python3.6/site-packages/urllib3/connection.py", line 187, in connect conn = self._new_conn() File "/usr/lib/python3.6/site-packages/urllib3/connection.py", line 172, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f96340a2e10>: Failed to establish a new con$ During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/usr/lib/python3.6/site-packages/urllib3/connectionpool.py", line 725, in urlopen Commenting out "configuration: /opt/mailman/gunicorn.cfg" brings Postorius back up. I am really frustrated here. All I want to do is export a 3000 member list and I can't. Updating Mailman 3 using new Docker images shouldn't break a stable installation either. Please help. Brian

3 4

Fwd: HOWTO: Mailman 3 Equivalent of "Accept: @all"
by Abhilash Raj July 21, 2020

July 21, 2020

Please use the mailman-users(a)mailman3.org list for questions related to Mailman 3 usage. Abhilash ----- Original message ----- From: "hmills(a)t-online.de" <hmills(a)t-online.de> To: "mailman-users-owner(a)mailman3.org" <mailman-users-owner(a)mailman3.org> Subject: HOWTO: Mailman 3 Equivalent of "Accept: @all" Date: Tuesday, July 21, 2020 9:31 AM Greetings, I have a question concerning usage of mailman3 (not an installation issue). Previously we used mailman2 & changed to mailman3 some months ago. "We" being a sports club located in Northern Germany. I guess I'm the "List Administrator" & "Moderator" - a colleague is the "Site Administrator". We use a number of maillists - one for "all" members and further ones e.g. for "instructors", "juniors" and so on. With mailman 2 it was possible to add "Accept: @all" in the configuration of the smaller maillists such as "instructors" thus enabling any club member to mail to the "instructors" but mails amongst the "instructors" remained just with themselves. Up to now we cannot do this with mailman3 which means I have to frequently approve mails (with the associated delay). I'm told (but not "how to do it") that with the recent update to mailman3 which our Site Administrator has installed it should be possible to do the "Accept: @all" mechanism - or similar. Could some kind soul please simply explain how I can achieve this? Best Wishes Howard -- thanks, Abhilash Raj (maxking)

1 0

Mail going to Held Messaging even the moderation is set to Accept Immediately
by Shashikanth Komandoor July 21, 2020

July 21, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 in production environment from the past 2 months almost. Recently I observed a peculiar case. There is a list say testlist(a)lists.testdom.com has a member say testuser(a)testdom.com whose Moderation attribute is set to "Accept immediately (bypass all other rules)". It is expected that the mail should be delivered to the recipients without being held irrespective of the body content as per my knowledge. (Correct me if I am wrong). But the mail went to "held messages" and is waiting for pending approval. The same user if he sends a normal and simple test mail, it is getting delivered automatically without coming to the "held message". And the same mail (which went to "held messages") is tried to be sent by another member whose moderation attribute is also set to "Accept immediately" only but observed the same effect as the message going to the "held messages". As per my understanding on Mailman 3, if the moderation attribute is set to "Accept immediately (bypass all other rules)" then without checking any rules, it should be delivered to the recipients of the list irrespective of the message or body of the message but is there any such checking if the body content or subject or any thing else is checked even if the moderation bit is set to "Accept immediately". Please help me to resolve this issue. Also, please let me know if I need to share any details. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 1

Sudden increase in "***UNCHECKED***" in email subjects
by Dave Clements July 20, 2020

July 20, 2020

Hi all, I have just noticed a big jump in the number of emails going out with "***UNCHECKED***" added to the subject line. Some of these are from users who had their moderation set to "Accept Immediately," but even after I change that to "Default processing" I am still getting those messages. The default action for members is "Default processing" Any ideas what settings I am missing? Thanks, Dave C -- https://bcc2020.github.io/ https://galaxyproject.org/

6 7

Confusing mailman user model
by Gilles Filippini July 19, 2020

July 19, 2020

Hi, I'm trying to understand the Mailman user model, and I'm confused about the respective roles of tables 'auth_user' and 'user'. Both have an 'id' column referred to as 'user_id' when used as a foreign key. But there seems to be no relation at all between them as they use different ids for the same user. Our mailman server was migrated from mailman2 to mailman3 about 1.5 year ago, and there is an inconsistency I'd like to fix: 2 of our users have a registered Mailman account with their respective email addresses in table 'auth_user', but these very same addresses in the 'address' table are linked to another old admin account in the 'user' table. Then if add one of these addresses as a domain owner, it it the old admin address which is selected instead. How could I fix that? Thanks in advance, _g.

2 4

Creating new lists
by Gilles Filippini July 19, 2020

July 19, 2020

Hi, I'd like to delegate lists creation to a couple of other users. I've added their email addresses as domain owners, but still they don't have the "Create New List" button available. Which condition a mailman user has to fulfill to be allowed to create new lists? Thanks, _g.

3 4

How to setup mailman?
by waqar.pixako＠gmail.com July 17, 2020

July 17, 2020

Hi @all I need to maintain mailing via api. I need to setup mailman for this purpose. I don't know how to setup it & how does it works. Please help me to resolve this issue. Thanks

3 2

Also deleted website example.com
by w.schoener＠alp.dillingen.de July 17, 2020

July 17, 2020

Hi there, i also deleted the website example.com, while I tried to configure my mailman 3 site. Now I get a Server-error, when I try to open my mailman3 sites: "An error occurred while processing your request" I tried to fix this problem by changing the SITE_ID=2 in my settings_local.py. But nothing helped, also the SITE_ID=0 did change nothing. I made a "/etc/init.d/apache2 restart" to ensure, that the settings are loaded again, but it didnt help. Is there anything I can do, besides reinstalling all django and mailman 3? Mailman Version 3.2.1, Python 2.7.16, Django 1.11.28 Thanks for any hints :-) Wolfgang

2 1

The Use of Hyperkitty as a Forum and Archiver
by Brian Carpenter July 15, 2020

July 15, 2020

Dear Mailman 3 Users, Since Mailman 3 includes a forum feature via Hyperkitty, I would like to know the following: - Has the forum feature (Hyperkitty) of MM3 been received well by your list members or is it mostly ignored? - Do you see an increase in the use of HK as a forum from your list members? - What kind of feedback have you received from your list members considering the forum function of MM3? Positive or negative? - Do you think HK is received well by your list members as an archiver and do you think it provides a better user experience for viewing/searching archives vs Pipermail of MM2? Thank you for anything you shared. I am very curious to know the state of Hyperkitty among the Mailman 3 user community. -- Please let me know if you need further assistance. Thank you for your business. We appreciate our clients. Brian Carpenter EMWD.com -- EMWD's Knowledgebase: https://clientarea.emwd.com/index.php/knowledgebase EMWD's Community Forums http://discourse.emwd.com/

4 4

R: Re: mailman3 does not send to the members of the lists
by blackout69 July 13, 2020

July 13, 2020

Hi, my mailman.cfg [mailman] site_owner: admin(a)pratico.work noreply_address: noreply default_language: en sender_headers: from from_ reply-to sender email_commands_max_lines: 10 pending_request_life: 3d cache_life: 7d pre_hook: post_hook: layout: debian filtered_messages_are_preservable: no html_to_plain_text_command: /usr/bin/lynx -dump $filename listname_chars: [-_.0-9a-z] [shell] prompt: >>> banner: Welcome to the GNU Mailman shell use_ipython: no history_file: [paths.debian] var_dir: /var/lib/mailman3 queue_dir: $var_dir/queue bin_dir: /usr/lib/mailman3/bin list_data_dir: $var_dir/lists log_dir: /var/log/mailman3 lock_dir: $var_dir/locks data_dir: $var_dir/data cache_dir: $var_dir/cache etc_dir: /etc/mailman3 ext_dir: $var_dir/ext messages_dir: $var_dir/messages archive_dir: $var_dir/archives template_dir: $var_dir/templates pid_file: /run/mailman3/master.pid lock_file: $lock_dir/master.lck [database] class: mailman.database.mysql.MySQLDatabase url: mysql+pymysql://mailman3:dbpassword@localhost/mailman3?charset=utf8&use_unicode=1 debug: no [logging.debian] format: %(asctime)s (%(process)d) %(message)s datefmt: %b %d %H:%M:%S %Y propagate: no level: info path: mailman.log [webservice] hostname: localhost port: 8001 use_https: no show_tracebacks: yes api_version: 3.1 admin_user: rest_user admin_pass: rest_pass [mta] incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver smtp_host: localhost smtp_port: 25 smtp_user: smtp_pass: lmtp_host: 127.0.0.1 lmtp_port: 8024 configuration: python:mailman.config.postfix [archiver.hyperkitty] class: mailman_hyperkitty.Archiver enable: yes configuration: /etc/mailman3/mailman-hyperkitty.cfg

4 8

Re: Using external services for deliverability?
by Tom ＠ Gather July 13, 2020

July 13, 2020

Thank you both for the help. I have SPF and reverse DNS setup. But I thought DKIM is no help because Mailman rewrites the email headers?

4 5

mailman3 does not send to the members of the lists
by maszap＠tin.it July 12, 2020

July 12, 2020

Goodmorning everyone, I'm setting up a mail server to manage a mailinglist. I installed mailman3-full and configured everything. I can create a list, add members to the list, but when I create a new thread, I only get it on the email from the same domain as the list. While all the other members of the list, they do not receive the thread. I tried to check the logs, but I don't see anything significant. What can I check? Thank you in advance Max

2 7

Mail control not given from Mailman 3 to postfix
by Shashikanth Komandoor July 12, 2020

July 12, 2020

Hi Team, I am currently running Mailman 3 with version 3.3.1 and in built postfix version 2.10.1-6 on RHEL 7.5 in production environment from the past 2 months almost. Recently I observed a peculiar case. There is a list say testlist(a)lists.testdom.com has a non member say testuser(a)testdom.com whose Moderation attribute is set to "Accept immediately (bypass all other rules). This testuser(a)testdom.com has sent a mail to testlist(a)lists.testdom.com and postfix of my Maliman 3 received the request and handed over to Mailman at 0.0.0.0:8024 socket running on the same machine and the same is logged in /var/log/maillog. Since the user has the moderation attribute set to Accept, the /var/lib/mailman/mailman/var/logs/vette.log also displayed "ACCEPT" on searching with the same message id. At this point, to my expectations, there should be 2 entries for this message id in smtp.log one for smtp and one for post. But I don't find any log records with this message id in smtp.log and of course the mail is not delivered even. Could you please help me out if I have missed any point or improperly understood the mail flow while using the mailman 3? Please also let me know if I need to see any more log files for tracing the issue. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 4

ARC
by David Krantz July 11, 2020

July 11, 2020

Hi, A completely different question: Is there anyone that has a working non-naive setup for ARC signing of mail list mail in mailman? I've tried both the built-in version but it was not usable in the version I tried for the case where there are several domains with different selectors and keys and where the outgoing mail also is DKIM-signed. This might be that the documentation is lacking but a very shallow look in the source gave me the impression that the implementation is limited to one domain which is not enough for my use case as I have lists in several domains. I use DKIM on outgoing mail with a setup where each domain has its own keys and selectors. As discussed here earlier, the DKIM signature should be added before the ARC signature. I have tried to use rspamd after a tip here for this but without luck so far, but this is somewhat off topic for mailman although related of course. rspamd seems very good for other purposes and solves my other problems with greylisting, DKIM-signing and spam filtering. That said, ARC seems difficult to get to work for forwarded mails there also... cheers // David

2 1

Update a member's display_name
by Nick Wynja July 8, 2020

July 8, 2020

Hi all, I want to update some list member's display_name either with mailman shell or mailmanclient. These mostly aren't users in Postorius so I only want to operate on the subscribed list member. I've tried everything I can find in the docs and am stuck. I've tried using `user_manager.get_user()` and then updating `user.display_name` followed by a `commit()` but it doesn't seem to persist the change. The `absorb_existing` flag for mailmanclient's `User.add_address()` looks promising but the docs read "It will import the existing user into the current one, not overwriting any previously set value." which in some cases, the member already has a display_name set. I haven't tried this yet. I'd appreciate any help pointing in the right direction. Thanks, Nick

5 10

Bounce handling after upgrade
by David Krantz July 8, 2020

July 8, 2020

Hi, I am in the process of configuring a new mailman3 server based on my old one. This includes upgrading to the latest version of mailman and installing a database upgrade. To my surprise mailman core started by sending tens of mails and blocking the corresponding users for very old bounces. What is worse is that this happens every time I start mailman core. Now I have blocked (almost) all outgoing mail in postfix using a transport map which discards it but this is a temporary testing measure of course. When I deploy this server into production, I do not want these recipients to be blocked as the old problems have been solved since very long. My plan is to reload the database from a newer backup anyway... Would it be enough to empty the bounce table (bounceevent) or is there anything else driving this behaviour? Or is there a better way to do this via the mailman shell? For me a "delete from bounceevent" seems a lot simpler than anything via the shell but there may be dependencies in the database. Cheers // David

2 1

Crash while importing archives
by Mark Dadgar July 8, 2020

July 8, 2020

This is actually an mbox file generated by mailman3. (venv) mailman@mail:/opt/mailman/mm$ /opt/mailman/mm/bin/django-admin hyperkitty_import --since 2020-02-19 -l trackjunkies(a)pdc-racing.net /temp/archive/trackjunkies-new-1.mbox Importing from mbox file /temp/archive/trackjunkies-new-1.mbox to trackjunkies(a)pdc-racing.net \Traceback (most recent call last): File "/opt/mailman/mm/venv/bin/django-admin", line 8, in <module> sys.exit(execute_from_command_line()) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/management/__init__.py", line 381, in execute_from_command_line utility.execute() File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/management/__init__.py", line 375, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/management/base.py", line 323, in run_from_argv self.execute(*args, **cmd_options) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/django/core/management/base.py", line 364, in execute output = self.handle(*args, **options) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/management/commands/hyperkitty_import.py", line 327, in handle importer.from_mbox(mbfile) File "/opt/mailman/mm/venv/lib/python3.8/site-packages/hyperkitty/management/commands/hyperkitty_import.py", line 152, in from_mbox for msg in mbox: File "/usr/lib/python3.8/mailbox.py", line 109, in itervalues value = self[key] File "/usr/lib/python3.8/mailbox.py", line 73, in __getitem__ return self.get_message(key) File "/usr/lib/python3.8/mailbox.py", line 781, in get_message msg.set_from(from_line[5:].decode('ascii')) UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 27: ordinal not in range(128) mailman 3.3.1 / core 3.1 Easy fix? I’m missing about 10 days' worth of archives as a result of this. - Mark ----- mark(a)pdc-racing.net | 408-348-2878

2 1

Importing list archives
by Mark Dadgar July 7, 2020

July 7, 2020

So I got a shiny new instance of Mailman3 installed (thanks Brian!). I recreated my lists and I am now importing large historical list archives from an mbox file (24GB). It takes a couple of hours to run this import, so I killed the import task after about 20 minutes so I could restart it in a screen session. Now when I restart the import, it finishes almost immediately: (venv) mailman@mail:/opt/mailman/mm$ /opt/mailman/mm/bin/django-admin hyperkitty_import -l trackjunkies(a)pdc-racing.net trackjunkies.mbox Importing from mbox file trackjunkies.mbox to trackjunkies(a)pdc-racing.net Computing thread structure Synchronizing properties with Mailman Warming up cache The full-text search index is not updated for this list. It will not be updated by the 'minutely' incremental update job. To update the index for this list, run the Django admin command with arguments 'update_index_one_list trackjunkies(a)pdc-racing.xn--net-to0a. (venv) mailman@mail:/opt/mailman/mm$ Which is clearly not correct. Anyone have an idea on how to restart this import? THanks! - Mark ----- mark(a)pdc-racing.net | 408-348-2878

2 2

Error after HyperKitty 1.3.x upgrade
by Florian Schulze July 6, 2020

July 6, 2020

Hi! After upgrading to HyperKitty 1.3.x I get the following error for qcluster: File ".../lib/python3.7/site-packages/django_q/cluster.py", line 300, in pusher task = SignedPackage.loads(task[1]) File ".../lib/python3.7/site-packages/django_q/signing.py", line 31, in loads serializer=PickleSerializer) File ".../lib/python3.7/site-packages/django_q/core_signing.py", line 38, in loads return serializer().loads(data) File ".../lib/python3.7/site-packages/django_q/signing.py", line 44, in loads return pickle.loads(data) AttributeError: Can't get attribute 'process_task_result' on <module 'hyperkitty.tasks' from '.../lib/python3.7/site-packages/hyperkitty/tasks.py'> How do I recover from that? It seems like there are still persisted tasks in the qcluster queue using the old code from 1.2.x with the old locking implementation. Regards, Florian Schulze

2 4

Using external services for deliverability?
by tom＠gather.coop July 4, 2020

July 4, 2020

I have a Mailman 3 server up and running but I'm terrified to migrate to it from my existing Mailman 2 provider for fear that services like Gmail will randomly start blacklisting my IP with little I can do about it. I have SPF records set up so I'm hoping I'll be Ok but I'd like to have a backup plan. Has anyone ever tried using an external service like Mailgun or Sendgrid as a relay? I tried both but couldn't get either to work due to their sender authentication mechanism. They want all 'From:' headers to be from domains that are pre-authenticated as senders. But Mailman keeps the 'From' header from the original sender so it won't match any authenticated domains. Right? Is there anything to be done here or do I just have to migrate and pray?

3 6

Example Logrotate files for Mailman3
by Andrew Hodgson July 3, 2020

July 3, 2020

Hi, Does anyone have any usable Logrotate files for Mailman3 (especially for the web stuff)? Will look to create my own if no one comes forward but if anyone has anything they are willing to share it would be fab. Thanks. Andrew.

2 2

hidden list is hidden even to the owner
by Mohsen Masoudfar July 2, 2020

July 2, 2020

Hi, I am not sure, if it is designed this way, or I am doing something wrong. I created a list in MM3 as a hidden list, meaning: Show list on index page: NO and assigned the owner. When I login as Postorius web admin, I see the list on the list page which is listed as: (unadvertised*). This is fine. But when the owner or moderator login to Postorius they don't see the list at all. Of course if they add the list name at the end of the URL, they get to the list and as the owner can manage it too. My question is: I am just not sure, if I am missing something or this is how it is supposed to work? You could expect, that the owner or the moderator should see the list as (unadvertised*) too. Best regards Mohsen Masoudfar Lead System Analyst, IT Operation American Association for the Advancement of Science 1200 New York Ave, NW, Washington, DC 20005 202-326-7087

3 4

clarifying configuration
by trewtus+200629maitr＠gmail.com June 30, 2020

June 30, 2020

Hey Team, I'm new to Mailman and after some failed attempts to install from git on CentOS8, I have just installed it on Ubuntu 20.04 using mostly aptitude. But it's not quite working and I want to increase the log level to better understand the problem. I did see another post that suggested that I add to /etc/mailman3/mailman.cfg [logging.template] level: debug But that doesn't work for me. For example, after using that `mailman conf` doesn't list and debug values and as far as I can tell, the service, even after restarting, is not logging any more than it was. On the other hand, if I add [logging.smtp] level: debug Invoking `mailman conf` will reflect that new loglevel. This started me down the path of trying to figure out the configuration system of mailman in hope that that will save me time down the road. I have read https://mailman.readthedocs.io/en/latest/src/mailman/config/docs/config.html but that doesn't seem to agree with what I'm seeing. For an additional example, my mailman.cfg file has a "logging.debian" section, but I don't see that section listed in the `mailman conf` output. Why would that be? I don't see in the documentation if `mailman conf` only sees values after the service is restarted. Nevertheless, restarting mailman hasn't helped. What guidance can you give? Context: `mailman info` produces: GNU Mailman 3.2.2 (La Villa Strangiato) Python 3.8.2 (default, Apr 27 2020, 15:53:34) [GCC 9.3.0] config file: /etc/mailman3/mailman.cfg db url: sqlite:////var/lib/mailman3/data/mailman.db devmode: DISABLED REST root url: http://localhost:8001/3.1/ REST credentials: restadmin:KI5TuWE/v.....

2 1

Moderation of posts via email is not working in mailman 3
by Shashikanth Komandoor June 30, 2020

June 30, 2020

Hi Team, In mailman 2, few of my users used to approve the held messages through the mail by writing Approved: header and the password of the list in the first line of the reply mail to the "confirm" attachment in the mail notification of the held messages. But after I started migrating my distribution lists from mailman 2 to mailman 3, my users are complaining that they could not approve the posts or the held messages through the mail as they usually do while they were browsing their lists in mailman 2. Is there any bug or limitation in mailman 3 or if I am doing any wrong at the server side? Please suggest. -- Thanks & Regards, Shashi Kanth.K 9052671936 <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 3

User settings triggers error
by Mark Dadgar June 29, 2020

June 29, 2020

If one of my users (including admin) goes to their user drop-down in the upper-right of Postorius and clicks Mailman Settings, it triggers an error: Here’s the error log: Internal Server Error: /mailman3/postorius/accounts/subscriptions/ KeyError at /postorius/accounts/subscriptions/ 'file' Request Method: GET Request URL: https://mail.pdc-racing.net/mailman3/postorius/accounts/subscriptions/ <https://mail.pdc-racing.net/mailman3/postorius/accounts/subscriptions/> Django Version: 2.2.12 Python Executable: /usr/bin/uwsgi-core Python Version: 3.8.2 Python Path: ['.', '', '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/python3.8/lib-dynload', '/usr/local/lib/python3.8/dist-packages', '/usr/lib/python3/dist-packages'] Server time: Tue, 16 Jun 2020 10:31:56 -0700 Installed Applications: ('hyperkitty', 'postorius', 'django_mailman3', 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora') Installed Middleware: ('django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware') Traceback: File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 34. response = get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 115. response = self.process_exception_by_middleware(e, request) File "/usr/lib/python3/dist-packages/django/core/handlers/base.py" in _get_response 113. response = wrapped_callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python3/dist-packages/django/contrib/auth/decorators.py" in _wrapped_view 21. return view_func(request, *args, **kwargs) File "/usr/lib/python3/dist-packages/postorius/views/user.py" in user_subscriptions 307. memberships = [m for m in mm_user.subscriptions] File "/usr/lib/python3/dist-packages/mailmanclient/restobjects/user.py" in subscriptions 62. for address in self.addresses: File "/usr/lib/python3/dist-packages/mailmanclient/restbase/base.py" in __iter__ 221. for entry in self.rest_data: File "/usr/lib/python3/dist-packages/mailmanclient/restbase/base.py" in rest_data 197. response, content = self._connection.call(self._url) File "/usr/lib/python3/dist-packages/mailmanclient/restbase/connection.py" in call 99. raise HTTPError(url, response.status, content, response, None) During handling of the above exception (HTTP Error 500: b'A server error occurred. Please contact the administrator.'), another exception occurred: File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 34. response = get_response(request) File "/usr/lib/python3/dist-packages/postorius/middleware.py" in __call__ 39. return self.get_response(request) File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in inner 36. response = response_for_exception(request, exc) File "/usr/lib/python3/dist-packages/django/core/handlers/exception.py" in response_for_exception 91. log_response( File "/usr/lib/python3/dist-packages/django/utils/log.py" in log_response 222. getattr(logger, level)( File "/usr/lib/python3.8/logging/__init__.py" in error 1463. self._log(ERROR, msg, args, **kwargs) File "/usr/lib/python3.8/logging/__init__.py" in _log 1577. self.handle(record) File "/usr/lib/python3.8/logging/__init__.py" in handle 1587. self.callHandlers(record) File "/usr/lib/python3.8/logging/__init__.py" in callHandlers 1649. hdlr.handle(record) File "/usr/lib/python3.8/logging/__init__.py" in handle 950. self.emit(record) File "/usr/lib/python3/dist-packages/django/utils/log.py" in emit 119. reporter = ExceptionReporter(request, is_email=True, *exc_info) File "/usr/lib/python3/dist-packages/django/views/debug.py" in __init__ 254. self.template_info = getattr(self.exc_value, 'template_debug', None) File "/usr/lib/python3.8/tempfile.py" in __getattr__ 607. file = self.__dict__['file'] Exception Type: KeyError at /postorius/accounts/subscriptions/ Exception Value: 'file' Request information: USER: admin GET: No GET data POST: No POST data FILES: No FILES data Anyone got a solution to this? - Mark ----- mark(a)pdc-racing.net | 408-348-2878

3 21

Server 500 error for just one list, just one page
by kelly.close＠lrewater.com June 28, 2020

June 28, 2020

I am having a curious problem with just ONE list management page for ONE list on my server. Every other list I've checked, and every other management page for this affected list, seem fine. But when I go to the Subscribers page for this one list I get a Server 500 error, and I can't find anything in the apache or mailman logs to give me a clue (granted I'm not sure I know for sure where all the different logs are). So specifically this page: https://udfcd-lists.org/mailman3/postorius/lists/alarms-all.udfcd-lists.org… For a list called "alarms-all" obviously. Any ideas? I'm able to review the list, it's members, etc in the PostsgreSQL tables and I'm not seeing any members with funky characters in their address - the one thing I could think of to check. Thanks, ~Kelly

2 1

Null sender?
by tom＠gather.coop June 28, 2020

June 28, 2020

Does Mailman generally send email with a null sender? This is what I see in the log: Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) handling connection Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) Data: b'LHLO mail.example.coop' Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) Data: b'MAIL FROM:<>' Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) sender: <> Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) Data: b'RCPT TO:<techque-bounces(a)example.org>' Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) recip: techque-bounces(a)example.org Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) Data: b'DATA' Jun 28 02:37:45 2020 (14588) ('127.0.0.1', 52726) Data: b'QUIT' Notice the empty MAIL FROM. Sendgrid seems to be choking on that because it needs to check if sending domain has been validated. If there is no sending domain it seems to reject. Why does Mailman do this? Can it be changed? I've been trying to find the relevant section of the code to no avail.

2 3

Hyperkitty 403 Forbidden Error
by Phil Thompson June 25, 2020

June 25, 2020

I'm in the process of setting up mailman3. The only problem I seem to be having is getting Hyperkitty to archive messages. Rather than the authorisation problems people have previously asked about on the list, I am getting a 403 error... Aug 05 15:38:40 2019 (10229) HyperKitty failure on http://localhost/mailman3/hyperkitty/api/mailman/urls: <html><title>Forbidden</title><body> <h1>Access is forbidden</h1></body></html> (403) Aug 05 15:38:58 2019 (10222) HyperKitty failure on http://localhost/mailman3/hyperkitty/api/mailman/archive: <html><title>Forbidden</title><body> <h1>Access is forbidden</h1></body></html> (403) Any suggestions would be appreciated. Phil

6 16

HyperKitty failure
by Gelpi Andrea June 24, 2020

June 24, 2020

Hi, in mailman log I found: Jun 20 17:36:49 2020 (1269) HyperKitty failure on http://localhost/mailman3/hyperkitty/api/mailman/urls: <html><title>Forbidden</title><body> <h1>Access is forbidden</h1></body></html> (403) Jun 20 17:36:49 2020 (1263) HyperKitty failure on http://localhost/mailman3/hyperkitty/api/mailman/archive: (405) Jun 20 17:36:49 2020 (1263) Exception in the HyperKitty archiver: Jun 20 17:36:49 2020 (1263) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/mailman_hyperkitty/__init__.py", line 154, in _archive_message url = self._send_message(mlist, msg) File "/usr/lib/python3/dist-packages/mailman_hyperkitty/__init__.py", line 210, in _send_message raise ValueError(result.text) ValueError And checking archive list I notice nothing has been added. Is it a permission issue (where?) or something else? Thanks in advance. -- Gelpi ing. Andrea -------------------------------------------------------------- It took the computing power of three C-64s to fly to the Moon. It takes a 486 to run Windows 95. Something is wrong here. --------------------------------------------------------------

3 4