May 2024 - Mailman-users - lists.mailman3.org

FYI: "RuntimeError: command failure: /usr/sbin/postmap /opt/mailman/mm/var/data/postfix_lmtp, 1, Operation not permitted"
by Nils May 27, 2024

May 27, 2024

After mailman was running so well I was wondering if I really need the restart option in the service configuration. When I commented it out, I got this error a few weeks later: > # systemctl status mailman3 > × mailman3.service - GNU Mailing List Manager > Loaded: loaded (/etc/systemd/system/mailman3.service; enabled; > vendor preset: enabled) > Active: failed (Result: exit-code) since Tue 2024-05-14 00:34:37 > CEST; 1 week 6 days ago > Process: 1159 ExecStart=/opt/mailman/venv/bin/mailman start > (code=exited, status=1/FAILURE) > CPU: 6.933s > > May 14 00:34:36 SERVER.TLD mailman[1159]: return > f(get_current_context(), *args, **kwargs) > May 14 00:34:36 SERVER.TLD mailman[1159]: File > "/opt/mailman/venv/lib/python3.10/site-packages/mailman/commands/cli_control.py", > line 109, in start > May 14 00:34:36 SERVER.TLD mailman[1159]: > call_name(config.mta.incoming).regenerate() > May 14 00:34:36 SERVER.TLD mailman[1159]: File > "/opt/mailman/venv/lib/python3.10/site-packages/mailman/mta/postfix.py", > line 136, in regenerate > May 14 00:34:36 SERVER.TLD mailman[1159]: raise > RuntimeError(NL.join(errors)) > May 14 00:34:36 SERVER.TLD mailman[1159]: RuntimeError: command > failure: /usr/sbin/postmap /opt/mailman/mm/var/data/postfix_lmtp, 1, > Operation not permitted > May 14 00:34:36 SERVER.TLD systemd[1]: mailman3.service: Control > process exited, code=exited, status=1/FAILURE > May 14 00:34:37 SERVER.TLD systemd[1]: mailman3.service: Failed with > result 'exit-code'. > May 14 00:34:37 SERVER.TLD systemd[1]: Failed to start GNU Mailing > List Manager. > May 14 00:34:37 SERVER.TLD systemd[1]: mailman3.service: Consumed > 6.933s CPU time. I can only guess that the error might be some case of very bad timing, because there shouldn't be any problem with the mentioned call. > # su mailman > (venv) mailman@SERVER:/$ /usr/sbin/postmap > /opt/mailman/mm/var/data/postfix_lmtp Usually works fine. I re-enabled the lines in the server configuration: > Restart=on-failure > RestartSec=15

1 0

Automatic migration from Mailman 2.1 (Debian buster) to Mailman 3 (Debian bookworm)
by schaefer＠alphanet.ch May 25, 2024

May 25, 2024

Hello, I already have some success in auto-migration from Mailman 2.1 (Debian buster) to Mailman 3 (Debian bookworm), using a new container (not upgrading the existing installation, which is obsolete e.g. 32 bit x86). I am doing this using custom scripts. The idea being to be able to import most of the existing configuration and archives, let the list administrators test the new system, and progressively advertise this to users. Then, the old container will be disabled. The basic stuff works (From: domain is OK, HTTP transport works, mail go out, etc) I however bumped into the following problem: How may I automatically (from the command line) replace the example.com which is displayed in the web interface and in the From: comment field of the e-mails (the address itself is OK) -- I only found documentation about changing through the GUI so far. Any pointer? Also, I have a question: if I import my 2.1 config for each ml, will DKIM work-arounds work (e.g. replace This User <user@domain> by This User user@domain <the-mailing-list>) ? Will Mailman 2.1 it required some config changes and also I had to modify mailman using a Debian diversion, AFAIR. Thank you for any input.

5 5

Where should Postfix, Django, Hyperkitty, Postorius, Dart-Sass, etc. be installed if MM3 is in a python virtual environment?
by Keith Christian May 25, 2024

May 25, 2024

Greetings, Mailman3 List ! mailman3 was installed into the below virtual environment: (venv) [mailman3@localhost-live ~]$ pip install wheel mailman psycopg2-binary Should, or must, any of Django, Hyperkitty, Postorius, Dart-Sass, or any other supporting programs be installed into this virtual environment ? PostgreSQL and Postfix have been successfully installed outside of the mailman3 virtual environment and start properly, I assume this is correct. Thanks in advance. ---- Keith

4 3

Congrats & MM3 Development Plans Request - Take 2
by David Wilson May 23, 2024

May 23, 2024

Liang Liu; Congratulations on securing your Summer of Code project with MM3. As someone who is quite interested in the Mailman3 development plans, I tried to follow the link you provided but with no success. It timed out. Is that still a valid or the best link? Can you also please point me to the best source or site to get a general understanding of short and long term *MM3 development plans*, including various upcoming GSOC projects, including yours. Thank you very much in advance. Best regards. Dave Wilson ------------------------------------------------------------------------ ___________________________________________ Mailman's content filtering has removed the following MIME parts from this message. Content-Type: image/png Name: qL0JVbh9Fk99UcFT.png Replaced multipart/alternative part with first alternative.

3 2

[GSoC] Self-introduction Liu
by Liang Liu May 21, 2024

May 21, 2024

Hello everyone, I’m Liang Liu, a GSoC student this year. I will be responsible for using the publish-subscribe model to improve communication efficiency between the core and clients. The detail of this function is shown in the link below. https://wiki.list.org/DEV/Google%20Summer%20of%20Code%202024#Support_for_RE… I am excited to learn from all of you and share my experiences. Please feel free to reach out to me for any collaboration or discussion—I am keen to contribute and learn as much as I can. Hope we have a productive summer.

1 0

List Configuration Attribute Descriptions
by steve.bachinsky＠tena-sda.org May 20, 2024

May 20, 2024

Where does one obtain a complete and concise description for all of the list configuration attributes? From the documentation, it is shown that the REST "config" interface will provide all of the attribute values associated with a particular list. But how does one find a concise description for all of these attributes? For example, I see that there is a list attribute for "default_nonmember_action" and there are two documentation pages for this attribute, but I can't find a concise description of the attribute and the permitted values. Thanks, Steve

2 1

Cloned mailman3 from the gitlab site, having issues locating the mailman3 file to start it
by Keith Christian May 20, 2024

May 20, 2024

The path to the mailman3.py file is: /home/mailman3/mailman/src/mailman/bin/mailman.py I created a mailman3 user, then, set the ownership on all directories and files in /home/mailman3 and below to mailman3:mailman3. When trying to run the "mailman info" command to verify that that mailman3 can start, I get this error: File "/home/mailman3/mailman/src/mailman/bin/mailman.py", line 22 in <module> from mailman.command.cli_help import help as help command Not sure what is going on here, help greatly appreciated.

3 4

When QQ email sends emails to the Mailman service set up by oneself, members of the list who use QQ email cannot receive the emails, and it shows that the emails are rejected.
by rqchen＠cnic.cn May 11, 2024

May 11, 2024

When QQ email sends emails to the Mailman service set up by oneself, members of the list who use QQ email cannot receive the emails, and it shows that the emails are rejected.

2 3

cnic-20240510
by 陈汝祈 May 10, 2024

May 10, 2024

cnic-20240510

1 0

Change Dmark settings via command line
by bob B May 8, 2024

May 8, 2024

I need to set all the DMARC settings on are lists to "replace from with list address". Is there an easy want to do this via cli? I could do it by viewing the web interface but we have a lot of lists.

4 9